 |
| Home | Contact |
2-Amino-2 Methyl-1- Propanol or AMP or β-Amino isobutanol or 2-Amino-2-methylpropan-1-ol SDS Safety Data Sheet of Supplier Exporter Manufacturers' Representative |
| Email: info@ammol.org |
| Call Toll Free +1-855-552-6665 Toll Free: 1-855-55-AMMOL |
2-Amino-2 Methyl-1- Propanol or AMP or β-Amino isobutanol or 2-Amino-2-methylpropan-1-ol
CAS Number: 124-68-5
Molecular Formula: C4H11NO
Molecular Weight: 89.14
2-Amino-2 Methyl-1- Propanol or AMP or β-Amino isobutanol or 2-Amino-2-methylpropan-1-ol
2-Amino-2 Methyl-1- Propanol or AMP or β-Amino isobutanol or 2-Amino-2-methylpropan-1-ol SDS Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet 18-August-2026
1. Product Identification
Product Name & Other Names: 2-Amino-2 Methyl-1- Propanol or AMP or β-Amino isobutanol or 2-Amino-2-methylpropan-1-ol.
CAS No.: 124-68-5
EINECS EC Code: 204-709-8
Molecular Weight: 89.14
Chemical Formula: C4H11NO
Relevant uses and uses advised against (if any): Industrial use only.
Supplier: American Molecules, 9910 Bent Oak Dr, Houston, TX 77040, USA.
Call Toll Free: 1-855-55-AMMOL 1-855-552-6665.
In case of emergency contact: Will be given with the supply.
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Skin Corrosion/Irritation (Category 2), H315
Serious Eye Damage/Irritation (Category 1) H318
Aquatic Toxicity Chronic, (Category 3 ) H412
Labeling according to GHS USA & Regulation (EC) No 1272/2008
| GHS Label Elements Corrosive |
Signal Words: Danger
Hazard Statements:
H315: Causes skin irritation.
H318: Causes serious eye damage
H412: Harmful to aquatic life with long lasting effects.
Precautionary Statements:
P262: Do not get in eyes, on skin, or on clothing.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P310: Immediately call a POISON CENTER or doctor/physician.
P302+352: IF ON SKIN: Wash with plenty of soap and water.
P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing.
P314: Get Medical advice/attention if you feel unwell.
P332+313: If skin irritation occurs, get medical advice/attention.
P337+313: If eye irritation persists, get medical advice/attention.
P501: Dispose of contents/container in accordance with local/national regulation.
3. Composition/Information on Ingredients
Product Name & Other Names: 2-Amino-2 Methyl-1- Propanol orAMP or β-Amino isobutanol or 2-Amino-2-methylpropan-1-ol.
CAS No.: 124-68-5
EINECS EC Code: 204-709-8
4. First Aid Measures
Always seek medical attention after first aid measures are provided.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reusing. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
Note to Physician: Symptomatic and supportive treatment is recommended.
5. Fire Fighting Measures
Products of Combustion: Oxides of Carbon and Nitrogen. Toxic Fumes are expected.
Explosion: Not considered to be an explosion hazard. Slight fire hazard. Dust/air mixtures may ignite or explode.
Fire Extinguishing Media: Regular dry chemical, carbon dioxide, water, and regular foam. For large fires use regular foam or flood with fine water spray. Avoid solid water jet, as it can scatter the fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. Containers can build up pressure if exposed to heat (fire). As in any fire, wear a self-contained breathing apparatus pressure-demand (MSHA/NIOSH approved or equivalent) and full protective gear. Apply alcohol-type foam or all-purpose foam manufacturers recommended techniques for large fires. Use carbon dioxide or dry chemicals for small fires. Use water spray to keep containers cool. Do not get water directly on material. Avoid inhalation of material or combustion by-products.
6. Accidental Release Measures
Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment cleanup procedures and Storage: Do not inhale dust, vapor, mist, or gas. Avoid dust formation. Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allowing it to evacuate as per law.
7. Handling and Storage
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling it. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents, strong acids, alkali. Keep away from ignition sources and naked flame. The reuse of this material's container for non-industrial purposes is prohibited. Storage: Refrigerated. Hygroscopic.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: None established.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposure as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice.
9. Physical and Chemical Properties
Appearance: White or Colorless to Almost white or almost colorless powder to lump to clear liquid, depending on the temperature.
Odor: Characteristic.
Odor threshold: No data found.
pH: No data found.
Relative density: 0.93
Melting point/freezing point: 25C-30C literature.
Initial boiling point and boiling range: 165C literature.
Flash point: No data found.
Auto-ignition temperature: No data found.
Decomposition temperature: No data found.
Upper/lower flammability or explosive limits: No data found.
Vapor pressure: No data found.
Vapor density: No data found.
Evaporation rate: No data found.
Flammability (solid, gas): No data found.
Partition coefficient: n-octanol/water: No data found.
Solubility: Miscible with water. Soluble in alcohol.
Viscosity: No data found.
10. Stability and Reactivity
Stability: It is stable under recommended conditions of use and storage. Avoid contact with strong acids, oxidizing agents, and heat.
Hazardous Decomposition Products: It emits toxic fumes and carbon monoxide when heated to decomposition. It may form carbon dioxide and unidentified compounds at elevated temperatures. Nitrogen oxides are expected
Hazardous Polymerization: Will not occur.
Incompatibilities: Avoid contact with strong acids, oxidizing agents.
Conditions to Avoid: Incompatibles.
11. Toxicological Information
Toxicity to Animals:
LD50 Oral - Rat - 2900 mg/kg.
Carcinogenic Effects: No data found.
Mutagenic Effects: No data found.
Teratogenic Effects: No data found.
Developmental Toxicity: No data found.
12. Ecological Information
Toxicity to fish: Static test LC50 (Lepomis macrochirus (Bluegill sunfish)): 190 mg/l Exposure time: 96 h.
Toxicity to daphnia and other aquatic invertebrates: static test LC50 (Daphnia magna (Water flea)): 193 mg/l Exposure time: 48 h.
Persistence and Degradability: No data found.
Mobility: No data found.
Bioaccumulation/ Accumulation: No data found.
Results of PBT and vPvB assessment: No data found.
Aquatic toxicity: Harmful to aquatic life with long lasting effects.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility.
14. Transport Information
LAND TRANSPORT USA DOT & ADR/RID Europe: Not controlled.
IATA & IMDG: Not controlled.
15. Regulatory Information
USA:
Section 311/312: Acute Health. See section 2.
California Proposition 65: Not listed for cancer, birth defects or reproductive harm.
Section 16 - Additional Information
European Labeling in Accordance with EC Directives:
H315: Causes skin irritation.
H318: Causes serious eye damage
H412: Harmful to aquatic life with long lasting effects.
Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************
American Molecules, also known as ammol.org is a distributor, supplier and manufacturers' representative of all types of Pharmaceuticals, Functional Ingredients, Excipients and Specialty Chemicals in Texas USA. Our principals manufacture supply and export USP NF BP, Ph Eur, etc grades of chemicals pure and reagent grade, mineral fortifiers, FCC food grade. Tailor made particle size and customized specifications are offered. The principal's facility is having one or more of the certifications like FDA approval and GLP, cGMP, ISO9001, ISO14001, ISO/IEC 17025, ISO22000, FSSC 22000, ISO45001, FSSAI, Kosher, HALAL, COPP, WHO-GMP certified and Written Confirmation (WC) for export to Europe is available. The manufacturers suppliers and exporters observe WHO Good Manufacturing Practices and Good Laboratory Practices.
Suppliers and Manufacturers' Representative:
9910 Bent Oak Dr
Houston, TX 77040, USA
Call Toll Free: 1-855-55-AMMOL 1-855-552-6665
Email: info@ammol.org