 |
4-Nitropphenyl Chloroformate or 4-Nitrophenyl Carbonochloridate or Chloroformic Acid 4-Nitrophenyl Ester or 4-Nitro Phenyl Chloroformate SDS Safety Data Sheet of Supplier Exporter Manufacturers' Representative |
Email: info@ammol.org |
Call Toll Free +1-855-552-6665 |
4-Nitropphenyl Chloroformate or 4-Nitrophenyl Carbonochloridate or Chloroformic Acid 4-Nitrophenyl Ester or 4-Nitro Phenyl Chloroformate
CAS Number: 7693-46-1
Molecular Formula: C7H4ClNO4
Molecular Weight: 201.56
4-Nitropphenyl Chloroformate or 4-Nitrophenyl Carbonochloridate or Chloroformic Acid 4-Nitrophenyl Ester or 4-Nitro Phenyl Chloroformate
4-Nitropphenyl Chloroformate or 4-Nitrophenyl Carbonochloridate or Chloroformic Acid 4-Nitrophenyl Ester SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet 02-Feb-226
1. Product Identification
Product Name & Other Names: 4-Nitropphenyl Chloroformate or 4-Nitrophenyl Carbonochloridate or Chloroformic Acid 4-Nitrophenyl Ester.
CAS No.: 7693-46-1
EINECS EC Code: 231-706-9
Molecular Weight: 201.56
Chemical Formula: C7H4ClNO4
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Supplier: American Molecules, 9910 Bent Oak Dr, Houston, TX 77040, USA.
Call Toll Free: 1-855-55-AMMOL 1-855-552-6665.
In case of emergency contact: Will be given with the supply.
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Skin corrosion (Sub-category 1B), H314
Respiratory sensitization (Category 3) H335
Labeling according to GHS USA & Regulation (EC) No 1272/2008
GHS Label Elements Corrosive |
Signal Word: Danger
Hazard Statements:
H314: Causes severe skin burns and eye damage.
H335: May cause respiratory irritation.
Precautionary Statements
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P264: Wash ... thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P271: Use only outdoors or in a well-ventilated area.
P272: Contaminated work clothing should not be allowed out of the workplace
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P284: Wear respiratory protection.
P301+P310+330: IF SWALLOWED: Rinse mouth and immediately call a POISON CENTER or doctor/physician.
P302+P352: IF ON SKIN: Wash with soap and water.
P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P304+P341+P311 IF INHALED: If breathing is difficult, remove to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or doctor/physician.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P403+P233: Store in a well-ventilated place. Keep container tightly closed.
P405: Store locked up.
P501: Dispose of contents/container in accordance with local/regional/national/international regulations.
3. Composition/Information on Ingredients
Product Name & Other Names: 4-Nitropphenyl Chloroformate or 4-Nitrophenyl Carbonochloridate or Chloroformic Acid 4-Nitrophenyl Ester.
CAS No.: 7693-46-1
EINECS EC Code: 231-706-9
4. First Aid Measures
Always seek medical attention after first aid measures are provided.
Inhalation: If inhaled, it will cause irritation and damage. Remove the victim to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: It will cause irritation and burns to mouth, digestive tract and stomach. Contact medical center quickly. Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Causes skin burns. On contact, it can cause itching, pain, swelling and redness. Immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Causes eye burns. It can cause severe irritation and harm to eyes. Check for and remove any contact lenses. Immediately flush eyes with running water for at least 15 minutes, keeping eyelids open. Cold water may be used. Get medical attention.
Notes to Physician: Treat symptomatically.
5. Fire Fighting Measures
Fire: Toxic fumes, hydrogen chloride gas, nitrogen oxides, chlorine and complex material may be formed in fire.
Explosion: No data available. Explosive decomposition possible on heating.
Fire Extinguishing Media: Dry chemical, foam or carbon dioxide and water spray jet. Avoid solid water jet. For this substance/mixture no limitations of extinguishing agents are given.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place.
6. Accidental Release Measures
Personal precautions, protective equipment and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil or water sources.
Methods and materials used for containment cleanup procedures and Storage: Contain spilled material. Sweep up and shovel and dispose of as hazardous waste. Keep in suitable, closed containers for disposal. Avoid dust formation. Keep away from heat. Keep away from sources of ignition. Wear full protective equipment and ensure ventilation.
7. Handling and Storage
Precautions for safe handling: Keep away from heat and source of fire preferably in a ventilated area. Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling. Do not drink, eat or smoke while handling. Avoid contact with skin, eyes and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong alkalis. oxidizing agents. Containers of may be hazardous when empty since they retain product residues. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Store away from oxidizing agents. Storage: Refrigerated. Moisture Sensitive, Heat Sensitive.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: Not established.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to the substance is apparent and engineering controls are not feasible, consult an industrial hygienist. For emergencies, or instances where the exposure levels are not known, use a full-face piece positive-pressure, air-supplied respirator. WARNING: Air purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection: Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection: Use chemical safety goggles and/or a full-face shield where splashing is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.
9. Physical and Chemical Properties
Appearance: Cream crystals.
Odor: Acrid odor.
Odor threshold: Not available.
pH: Not available.
Relative density: about 1.5 predicted.
Boiling Point: Not available.
Melting Point: 79C to 83C literature.
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition Temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility(ies): Reacts with water. Soluble in acetone.
Viscosity: Not available.
Mutagenic Effects: Not available.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.
Molecular Weight: 201.56
Chemical Formula: C7H4ClNO4.
10. Stability and Reactivity
Stability: Stable under recommended conditions of use and storage. Store away from oxidizing agents.
Hazardous Decomposition Products: Toxic fumes, hydrogen chloride gas, nitrogen oxides, chlorine and complex material may be formed in fire.
Hazardous Polymerization: Not reported.
Incompatibilities: Strong oxidizing agents.
Conditions to Avoid: Heat, flames, light, ignition sources and incompatibles.
11. Toxicological Information
Oral rat LD50: No information available.
Carcinogenicity: Not listed as a carcinogen by ACGIH, IARC, NTP, or CA Prop 65.
Reproductive Toxicity: No information available.
Developmental Effects: No information available.
Teratogenicity: No information available.
12. Ecological Information
Persistence and Degradability: Unlikely to persist.
Mobility: Will likely be mobile in the environment.
Results of PBT and vPvB assessment: No information available.
Environmental Toxicity: No information available.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state, and local requirements.
14. Transport Information
DOT USA, TDG Canada & ADR/RID Europe:
UN Number: 3261
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S. (2-(4-Nitropphenyl Chloroformate)
Hazard Class: 8; Packing Group: II.
IMDG/IMO & IATA/ICAO:
UN Number: 3261
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S. (2-(4-Nitropphenyl Chloroformate)
Hazard Class: 8; Packing Group: II.
15. Regulatory Information
USA:
SARA 311/312: Acute health hazard, Chronic health hazard. See section 2.
California Prop 65: Not applicable.
Section 16 - Additional Information
European Labeling in Accordance with EC Directives:
H314: Causes severe skin burns and eye damage.
H335: May cause respiratory irritation.
Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************
American Molecules, also known as ammol.org is a distributor, supplier and manufacturers' representative of all types of Pharmaceuticals, Functional Ingredients, Excipients and Specialty Chemicals in Texas USA. Our principals manufacture supply and export USP NF BP, Ph Eur, etc grades of chemicals pure and reagent grade, mineral fortifiers, FCC food grade. Tailor made particle size and customized specifications are offered. The principal's facility is having one or more of the certifications like FDA approval and GLP, cGMP, ISO9001, ISO14001, ISO/IEC 17025, ISO22000, FSSC 22000, ISO45001, FSSAI, Kosher, HALAL, COPP, WHO-GMP certified and Written Confirmation (WC) for export to Europe is available. The manufacturers suppliers and exporters observe WHO Good Manufacturing Practices and Good Laboratory Practices.
Suppliers and Manufacturers' Representative:
9910 Bent Oak Dr
Houston, TX 77040, USA
Call Toll Free: 1-855-55-AMMOL 1-855-552-6665
Email: info@ammol.org