 |
| Home | Contact |
5-Chlorovaleryl Chloride (5-CVC) or 5-Chloropentanoyl Chloride or 5-Chlorovaleric Acid Chloride SDS Safety Data Sheet of Supplier Exporter Manufacturers' Representative |
| Email: info@ammol.org |
| Call Toll Free +1-855-552-6665 Toll Free: 1-855-55-AMMOL |
5-Chlorovaleryl Chloride (5-CVC) or 5-Chloropentanoyl Chloride or 5-Chlorovaleric Acid Chloride
CAS Number: 1575-61-7
Molecular Formula: C5H8Cl2O
Molecular Weight: 155.02
5-Chlorovaleryl Chloride (5-CVC) or 5-Chloropentanoyl Chloride or 5-Chlorovaleric Acid Chloride
5-Chlorovaleryl Chloride (5-CVC) or 5-Chloropentanoyl Chloride or 5-Chlorovaleric Acid Chloride SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet
1. Product Identification
Product Name & Other Names: 5-Chlorovaleryl Chloride (5-CVC) or 5-Chloropentanoyl Chloride or 5-Chlorovaleric Acid Chloride.
CAS No.: 1575-61-7
EINECS EC Number: 216-403-1
Molecular Formula: C5H8Cl2O
Molecular Weight: 155.02
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Supplier: American Molecules, 9910 Bent Oak Dr, Houston, TX 77040, USA.
Call Toll Free: 1-855-55-AMMOL 1-855-552-6665.
In case of emergency contact: Will be given with the supply.
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Acute toxicity, Oral Category 4, H302
Skin corrosion/irritation Category 1A, B, C, H314
Labeling according to GHS USA & Regulation (EC) No 1272/2008
| GHS Label Elements Corrosive |
Signal Words: Danger
Hazard Statements:
H302: Harmful if swallowed.
H314: Causes severe skin burns and eye damage.
Precautionary Statements:
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P264: Wash contaminated parts thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P271: Use only outdoors or in a well-ventilated area.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P301+P310: IF SWALLOWED: Immediately call a POSION CENTER or doctor/physician.
P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P302+352: IF ON SKIN: Wash with plenty of soap and water.
P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing.
P360: Rinse immediately contaminated clothing and skin with plenty of water before removing clothes.
P403 P404: Store in well-ventilated place. Keep container tightly closed.
3. Composition/Information on Ingredients
Product Name & Other Names: 5-Chlorovaleryl Chloride (5-CVC) or 5-Chloropentanoyl Chloride or 5-Chlorovaleric Acid Chloride.
CAS No.: 1575-61-7
EINECS EC Number: 216-403-1
4. First Aid Measures
Always seek medical attention after first aid measures are provided.
Inhalation: Remove affected person to fresh air; if normal breathing has not returned within a few minutes after exposure, get medical attention.
Skin: Remove contaminated clothing; wash affected area with soap and water; launder contaminated clothing before reusing. Seek medical attention.
Eyes: Immediately, flush eyes for 15 minutes in clear running water while holding eyelids open; seek medical attention immediately.
Ingestion: Drink two glasses of water. Do not induce vomiting; seek medical attention immediately.
Physician may treat symptomatically.
5. Fire Fighting Measures
General Hazards: Contact with the eyes causes immediate severe irritation of the eye and eyelids. Product will support combustion.
Extinguishing Media: Carbon dioxide, dry chemical.
Fire & Explosion Hazard: May evolve oxides of fumes along with compounds of chlorine under fire conditions.
Unusual Fire and Explosion Hazards: Closed containers of can explode due to buildup of pressure when exposed to extreme heat.
Hazardous Combustion Products: Products of combustion include smoke, toxic fumes, oxides of carbon, chlorine compounds.
Extinguishing Media Not recommended: Avoid using solid water jet as it can scatter the fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes.
6. Accidental Release Measures
Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment cleanup procedures and Storage: Do not inhale dust, vapor, mist, or gas. Avoid dust formation. Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Use a shovel to put the material into a convenient waste disposal container.
7. Handling and Storage
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents, alcohol, and strong bases. Storage: Room Temperature (Recommended in a cool and dark place, <15C). Moisture sensitive.
8. Exposure Controls/Personal Protection
Exposure Limits: This product does not contain any hazardous materials with occupational exposure limits established by the region-specific regulatory bodies.
Engineering Controls: The use of local exhaust ventilation is recommended to control emissions near the source. Provide mechanical ventilation of confined spaces. Use corrosion-resistant, explosion-proof ventilation equipment.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.
9. Physical and Chemical Properties
Appearance: Clear colorless to yellow color liquid.
Odor: Irritating.
Odor threshold: Not available.
pH: Not available.
Relative density: about 1.21
Melting point/freezing point: Not available.
Boiling Point: Not available.
Flash point: 90C.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor Pressure (MM Hg): Not available.
Vapor Density (Air = 1) : Not available.
Evaporation Rate (water = 1): Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility in Water: Soluble in water.
Viscosity: Not available.
10. Stability and Reactivity
Stability: Stable at recommended temperatures and operating conditions. Harmful if swallowed. Causes severe skin burns and eye damage. Corrosive and moisture-sensitive; reacts with water.
Conditions to Avoid: Avoid excessively high temperatures and contact with Acids, Bases, Water, Strong oxidizing agents, Alcohols, Amines.
Incompatibilities: Acids, Bases, Water, Strong oxidizing agents, Alcohols, Amines.
Decomposition: Decomposition yields oxides of carbon & chlorine compounds along with fumes.
Polymerization: Polymerization will not occur.
11. Toxicological Information
Acute Oral Effects:
Oral LD50 Rats 500.1mg/kg.
Reproduction: Not evaluated.
Mutagenicity: Not evaluated.
Carcinogenicity: Not listed as a human carcinogen by OSHA, IARC, ACGIH & NTP.
12. Ecological Information
Toxicity to fish: Not available.
Persistence and Degradability: Soluble in water Persistence is unlikely based on information available.
Bioaccumulation/ Accumulation: No information available.
Mobility: Will be mobile in the environment due to its water solubility
Results of PBT and vPvB assessment: Not PBT of vPvB.
13. Disposal Considerations
Dispose of it in accordance with Local, State, and Federal Regulations. Consult local, state, or Federal Environmental Protection Agency before disposing of any chemicals. Follow all the pollution control rules.
14. Transport Information
DOT USA, TDG Canada & ADR/RID Europe:
UN Number: 3265
Proper Shipping Name: Corrosive liquid, acidic, organic, n.o.s. 5-Chlorovaleryl chloride
Hazard Class 8, Packing Group: II.
IMDG/IMO:
UN Number: 3265
Proper Shipping Name: Corrosive liquid, acidic, organic, n.o.s. 5-Chlorovaleryl chloride
Hazard Class 8, Packing Group: II.
ICAO/IATA:
UN Number: 3265
Proper Shipping Name: Corrosive liquid, acidic, organic, n.o.s. 5-Chlorovaleryl chloride
Hazard Class 8, Packing Group: II.
15. Regulatory Information
UNITED STATES REGULATORY INFORMATION
SARA 311/312: Acute Health Hazard.
California Prop 65: Not listed.
Section 16 - Additional Information
DISCLAIMER: The information and recommendations set forth herein are presented in good faith and believed correct as of the date hereof. It is compiled from various sources, and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules, or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a professionally trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
American Molecules, also known as ammol.org is a distributor, supplier and manufacturers' representative of all types of Pharmaceuticals, Functional Ingredients, Excipients and Specialty Chemicals in Texas USA. Our principals manufacture supply and export USP NF BP, Ph Eur, etc grades of chemicals pure and reagent grade, mineral fortifiers, FCC food grade. Tailor made particle size and customized specifications are offered. The principal's facility is having one or more of the certifications like FDA approval and GLP, cGMP, ISO9001, ISO14001, ISO/IEC 17025, ISO22000, FSSC 22000, ISO45001, FSSAI, Kosher, HALAL, COPP, WHO-GMP certified and Written Confirmation (WC) for export to Europe is available. The manufacturers suppliers and exporters observe WHO Good Manufacturing Practices and Good Laboratory Practices.
Suppliers and Manufacturers' Representative:
9910 Bent Oak Dr
Houston, TX 77040, USA
Call Toll Free: 1-855-55-AMMOL 1-855-552-6665
Email: info@ammol.org