 |
Benzododecinium Bromide or Benzyldimethyldodecylammonium Bromide SDS Safety Data Sheet of Supplier Exporter Manufacturers' Representative |
Email: info@ammol.org |
Call Toll Free +1-855-552-6665 |
Benzododecinium Bromide or Benzyldimethyldodecylammonium Bromide
CAS Number: 7281-04-1
Molecular Formula: 7281-04-1
Molecular Weight: 384.44
Benzododecinium Bromide
or Benzyldimethyldodecylammonium Bromide
Benzododecinium bromide or Dimethyldodecylbenzylammonium bromide or Benzyldodecyldimethylammonium bromide or Benzyldimethyldodecylammonium bromide SDS Safety Data Sheet or MSDS, Material Safety Data Sheet 04-Feb-24
1. Product Identification
Product Name & Other Names: Benzododecinium bromide or Dimethyldodecylbenzylammonium bromide or Benzyldodecyldimethylammonium bromide or Benzyldimethyldodecylammonium bromide.
CAS No.: 7281-04-1
EINICS EC-No.: 230-698-4
Supplier: American Molecules, 9910 Bent Oak Dr, Houston, TX 77040, USA.
Call Toll Free: 1-855-55-AMMOL 1-855-552-6665.
In case of emergency contact: Will be given with the supply.
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Acute toxicity, Oral (Category 3), H301
Skin irritation (Category 2), H315
Eye irritation (Category 2), H319
Specific target organ toxicity - single exposure (Category 3), Respiratory system, H335
Labeling according to GHS & Regulation (EC) No 1272/2008
GHS Label Elements  Danger |
Signal Words: Warning
Hazard Statements:
H301: Toxic if swallowed
H315: Causes skin irritation.
H319: Causes serious eye irritation.
H335: May cause allergy or asthma symptoms or breathing difficulties if inhaled.
Precautionary Statements
P202: Do not handle until all safety precautions have been read and understood.
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P270: Do not eat, drink or smoke when using this product.
P280-Wear protective gloves/protective clothing/eye protection/face protection.
P301+P310+330: IF SWALLOWED: Rinse mouth and immediately call a POISON CENTER or doctor/physician.
P303 + P361 + P352 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Wash with plenty of soap and water.
P304 + P341 + P311 IF INHALED: If breathing is difficult, remove to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or doctor/physician.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P332+P313: If skin irritation occurs: Get medical advice/attention.
P337+P313 If eye irritation persists: Get medical advice/ attention.
3. Composition/Information on Ingredients
Product Name & Other Names: Benzododecinium bromide or Dimethyldodecylbenzylammonium bromide or Benzyldodecyldimethylammonium bromide or Benzyldimethyldodecylammonium bromide.
CAS No.: 7281-04-1
EINICS EC-No.: 230-698-4
Composition: Minimum 96.0%
4. First Aid Measures
Always seek medical advice after the first aid treatment.
If inhaled: If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact: off with soap and plenty of water. Take victim immediately to hospital. Consult a physician.
In case of eye contact: Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed: Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
5. Fire Fighting Measures
Extinguishing media: Suitable extinguishing media. Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide.
Special hazards arising from the substance or mixture: Carbon oxides, Nitrogen oxides (NOx), Hydrogen bromide gas Combustible.
Extinguishing Media Not recommended: Avoid using solid water jet as it may scatter the fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used.
6. Accidental Release Measures
Personal precautions, protective equipment, and emergency procedures: Wear respiratory protection. Avoid dust formation. Avoid breathing vapors, mist, or gas.
Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust.
Environmental precautions: Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
Methods and materials for containment and cleaning up: Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed containers for disposal.
7. Handling and Storage
Precautions for safe handling: Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Provide appropriate exhaust ventilation at places where dust is formed.
Conditions for safe storage, including any incompatibilities: container tightly closed in a dry and well-ventilated place. Store in cool place.
8. Exposure Controls/Personal Protection
Exposure Limits: This product does not contain any hazardous materials with occupational exposure limits established by the region-specific regulatory bodies.
Appropriate engineering controls: Avoid contact with skin, eyes, and clothing. Wash hands before breaks and immediately after handling the product.
Personal protective equipment
Eye/face protection: Face shield and safety glasses Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection: Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Wash and dry hands.
Body Protection: Complete suit protecting against chemicals.
Respiratory protection: Where risk assessment shows air-purifying respirators are appropriate use a full-face particle respirator type N99 (US) or type P2 (EN 143) respirator cartridges as a backup to engineering controls.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.
9. Physical and Chemical Properties
Appearance: It occurs as white to off-white powder
Odor: Not available
Odor threshold: No data found.
pH: No data found.
Melting Point: 47C to 55C literature.
Initial boiling point and boiling range: No data found.
Flash point: 110C - closed cup
Auto-ignition temperature: No data found.
Decomposition temperature: No data found.
Upper/lower flammability or explosive limits: No data found.
Vapor pressure: No data found.
Vapor density: No data found.
Evaporation rate: No data found.
Flammability (solid, gas): No data found.
Partition coefficient: n-octanol/water: No data found.
Solubility: Colorless to faint yellow
Viscosity: No data found.
10. Stability and Reactivity
Chemical stability: Stable under recommended storage conditions.
Possibility of hazardous reactions: No data available
Conditions to avoid: No data available
Incompatible materials: Oxidizing agents
Hazardous decomposition products:
Hazardous decomposition products formed under fire conditions. - Carbon oxides, Nitrogen
oxides (NOx), Hydrogen bromide gas
Other decomposition products: No data found.
11. Toxicological Information
Acute toxicity: LD50 Oral - Rat - 230 mg/kg
Skin corrosion/irritation: No data found.
Germ cell mutagenicity: No data found.
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible, or confirmed human carcinogen by IARC NTP or OSHA.
Reproductive toxicity: No data found.
12. Ecological Information Toxicity
Persistence and degradability: No No data found.
Bioaccumulative potential: No data found.
Mobility in soil: No data found.
Results of PBT and vPvB assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
13. Disposal Considerations
Offer surplus and non-recyclable solutions to a licensed disposal company. Dissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber. Waste material must be disposed of in accordance with the law.
14. Transport Information
Land Transport USA DOT TDG Canada & ADR/RID Europe:
UN number 2811
UN proper shipping name: Toxic solid, organic, n.o.s. (Benzododecinium Bromide)
Transport hazard class 6.1; Packaging group III.
Sea Transport IMO/IMDG:
UN number 2811
UN proper shipping name: Toxic solid, organic, n.o.s. (Benzododecinium Bromide)
Transport hazard class 6.1; Packaging group III.
Air Transport ICAO/IATA:
UN number 2811
UN proper shipping name: Toxic solid, organic, n.o.s. (Benzododecinium Bromide)
Transport hazard class 6.1; Packaging group III.
15. Regulatory Information
USA:
SARA 311/312 Hazards: See section 2.
California Prop. 65 Components: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.
16. Other Information
European Labeling in Accordance with EC Directives:
H301: Toxic if swallowed
H315: Causes skin irritation.
H319: Causes serious eye irritation.
H335: May cause allergy or asthma symptoms or breathing difficulties if inhaled.
DISCLAIMER: The information and recommendations set forth herein are presented in good faith and believed correct as of the date hereof. It is compiled from various sources, and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules, or insurance requirements applicable. This SDS MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a professionally trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose. This shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. In no case shall our company be liable to loss or damages by the product user.
Please visit Main Page of Benzododecinium Bromide or Benzyldimethyldodecylammonium Bromide Suppliers.
American Molecules, also known as ammol.org is a distributor, supplier and manufacturers' representative of all types of Pharmaceuticals, Functional Ingredients, Excipients and Specialty Chemicals in Texas USA. Our principals manufacture supply and export USP NF BP, Ph Eur, etc grades of chemicals pure and reagent grade, mineral fortifiers, FCC food grade. Tailor made particle size and customized specifications are offered. The principal's facility is having one or more of the certifications like FDA approval and GLP, cGMP, ISO9001, ISO14001, ISO/IEC 17025, ISO22000, FSSC 22000, ISO45001, FSSAI, Kosher, HALAL, COPP, WHO-GMP certified and Written Confirmation (WC) for export to Europe is available. The manufacturers suppliers and exporters observe WHO Good Manufacturing Practices and Good Laboratory Practices.
Suppliers and Manufacturers' Representative:
9910 Bent Oak Dr
Houston, TX 77040, USA
Call Toll Free: 1-855-55-AMMOL 1-855-552-6665
Email: info@ammol.org