 |
Diclofenac Sodium SDS Safety Data Sheet of Supplier Exporter Manufacturers' Representative |
Email: info@ammol.org |
Call Toll Free +1-855-552-6665 |
Quick Links to Products: Aceclofenac | Chromic Chloride | Chromium Glycinate | Chromium Picolinate | Cinnamic Aldehyde | Cinnamon Oil | Diclofenac Sodium | and more -- |
Diclofenac Sodium
CAS Number: 15307-79-6
Molecular Formula: C14H10Cl2NNaO2
Molecular Weight: 318.13
Diclofenac Sodium
Diclofenac Sodium SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet 24-Jan-25
1. Product Identification
Product Name & Other Names: Diclofenac Sodium.
CAS No.: 15307-79-6
EINECS EC Number: 239-346-4
Relevant uses and uses advised against (if any): Industrial use.
Suppliers: As per letterhead.
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Acute toxicity, Oral: Category 3, H301
Reproductive toxicity (Category 2), H361
Specific target organ toxicity - repeated exposure, Oral (Category 1), Peripheral nervous system, H372
Labeling according to Regulation (EC) No 1272/2008
GHS Label Elements  Toxic |
GHS Label Elements |
Signal Words: Danger
Hazard Statements:
H301: Toxic if swallowed.
H361: Suspected of damaging unborn child.
H372: Causes damage to organs through prolonged or repeated exposure.
Precautionary Statements:
P201 - Obtain special instructions before use.
P301+P310: IF SWALLOWED: Immediately call a POSION CENTER or doctor/physician.
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P270: Do not eat, drink or smoke when using this product.
P271: Use only outdoors or in a well-ventilated area.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P314: Get medical advice/attention if you feel unwell.
P302+352: IF ON SKIN: Wash with plenty of soap and water.
P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes.
P337+P313: If eye irritation persists get medical advice/attention.
3. Composition/Information on Ingredients
Product Name & Other Names: Diclofenac Sodium.
CAS No.: 15307-79-6
EINECS EC Number: 239-346-4
4. First Aid Measures
Always seek medical attention after first aid measures are provided.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Induce vomiting immediately as directed by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention.
Eye Contact: Check for and remove any contact lenses. Immediately flush your eyes with running water for at least 15 minutes, keeping eyelids open. Do not use eye ointment. Seek medical attention.
5. Fire Fighting Measures
Fire: Not expected to be a fire hazard. However, it may burn at high temperature.
Fire Extinguishing Media: Water spray, dry chemical, alcohol foam, or carbon dioxide.
Special hazards arising from the substance or mixture: Carbon oxides Nitrogen oxides (NOx), Chlorine compounds and Fumes. Avoid solid water jets as they can scatter the fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment cleanup procedures and Storage:
Small Spill:Use appropriate tools to put the spilled solid in a convenient waste disposal container.
Large Spill: Do not inhale dust, vapors, mist, or gas. Avoid dust formation. Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Use a shovel to put the material into a convenient waste disposal container.
7. Handling and Storage
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like oxidizing agents. Storage: 15C to 30C. Ok to freeze. Short term shipping may be ambient.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: This product, as supplied, does not contain any hazardous materials with occupational exposure limits established by the region-specific regulatory bodies.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice.
9. Physical and Chemical Properties
Appearance: White crystalline powder. Hygroscopic.
Odor: No information found.
Odor threshold: No information found.
pH: 7 to 8.5
Relative density: No information found.
Melting Point: No information found.
Initial boiling point and boiling range: No information found.
Flash point: No information found.
Auto-ignition temperature: No information found.
Decomposition temperature: No information found.
Upper/lower flammability or explosive limits: No information found.
Vapor pressure: No information found.
Vapor density: No information found.
Evaporation rate: No information found.
Flammability (solid, gas): No information found.
Partition coefficient: n-octanol/water: No information found.
Solubility: Soluble in methanol, giving clear solution.
Viscosity: No information found.
10. Stability and Reactivity
Stability: Stable under ordinary conditions of use and storage. Forms explosive mixtures with air on intense heating.
Hazardous Decomposition Products: May emit ammonia, nitrogen oxides, carbon oxides, chlorine compounds and fumes when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Oxidizing agents.
Conditions to Avoid: Incompatibles. Moisture.
11. Toxicological Information
Oral rat LD50: 53 mg/kg.
Orl Mouse LD50: 95 mg/kg.
Carcinogenicity: No information found.
Teratogenic Effects: Not available.
Mutagenic Effects: Mutagenic.
Developmental Toxicity: No information found.
Reproductive Effects: Suspected of damaging the unborn child.
12. Ecological Information
Toxicity to fish: No information found.
Persistence and Degradability: Unlikely to persist due.
Mobility: Likely to be mobile.
Bioaccumulation/ Accumulation: No information found.
Results of PBT and vPvB assessment: No information found for assessment.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Follow all the pollution control rules.
14. Transport Information
DOT USA, TDG Canada & ADR/RID Europe:
Proper Shipping Name: Toxic solid, organic, n.o.s. (Diclofenac Sodium).
Hazard Class: 6.1
UN/NA: UN 2811
Packing Group: III.
IMDG/IMO:
Proper Shipping Name: Toxic solid, organic, n.o.s. (Diclofenac Sodium).
Hazard Class: 6.1
UN/NA: UN 2811
Packing Group: III.
IATA/ICAO:
Proper Shipping Name: Toxic solid, organic, n.o.s. (Diclofenac Sodium).
Hazard Class: 6.1
UN/NA: UN 2811
Packing Group: III.
15. Regulatory Information
USA Regulations:
SARA 311/312: See section 2.
Section 16 - Additional Information
Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************
Please visit Main Page of Diclofenac Sodium Suppliers.
American Molecules, also known as ammol.org is a distributor, supplier and manufacturers' representative of all types of Pharmaceuticals, Functional Ingredients, Excipients and Specialty Chemicals in Texas USA. Our principals manufacture supply and export USP NF BP, Ph Eur, etc grades of chemicals pure and reagent grade, mineral fortifiers, FCC food grade. Tailor made particle size and customized specifications are offered. The principal's facility is having one or more of the certifications like FDA approval and GLP, cGMP, ISO9001, ISO14001, ISO/IEC 17025, ISO22000, FSSC 22000, ISO45001, FSSAI, Kosher, HALAL, COPP, WHO-GMP certified and Written Confirmation (WC) for export to Europe is available. The manufacturers suppliers and exporters observe WHO Good Manufacturing Practices and Good Laboratory Practices.
Suppliers and Manufacturers' Representative:
9910 Bent Oak Dr
Houston, TX 77040, USA
Call Toll Free: 1-855-55-AMMOL 1-855-552-6665
Email: info@ammol.org