 |
| Home | Contact |
l-Glutamic Acid Hydrochloride or l-Glutamic Acid HCl SDS Safety Data Sheet of Supplier Exporter Manufacturers' Representative |
| Email: info@ammol.org |
| Call Toll Free +1-855-552-6665 Toll Free: 1-855-55-AMMOL |
l-Glutamic Acid Hydrochloride or l-Glutamic Acid HCl
CAS Number: 138-15-8
Molecular Formula: C5H9NO4-ClH
Molecular Weight: 183.59
l-Glutamic Acid Hydrochloride or l-Glutamic Acid HCl
l-Glutamic Acid Hydrochloride SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet 11-August-26
1. Product Identification
Product Name & Other Names: l-Glutamic Acid Hydrochloride.
CAS No.: 138-15-8
EINECS EC Code: 205-315-9
Molecular Weight: 183.59
Chemical Formula: C5H9NO4-ClH
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Supplier: American Molecules, 9910 Bent Oak Dr, Houston, TX 77040, USA.
Call Toll Free: 1-855-55-AMMOL 1-855-552-6665.
In case of emergency contact: Will be given with the supply.
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Skin corrosion (Sub-category 1B), H314
Labeling according to GHS USA & Regulation (EC) No 1272/2008
| GHS Label Elements Corrosive |
Signal Word: Danger
Hazard Statements:
H314: Causes severe skin burns and eye damage.
Precautionary Statements
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P270: Do not eat, drink or smoke when using this product.
P271: Use only outdoors or in a well-ventilated area.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P284: Wear respiratory protection.
P301+P310+330: IF SWALLOWED: Rinse mouth and immediately call a POISON CENTER or doctor/physician.
P302+P352: IF ON SKIN: Wash with soap and water.
P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P304+P341+P311: IF INHALED: If breathing is difficult, remove to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or doctor/physician.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P403+P233: Store in a well-ventilated place. Keep container tightly closed.
3. Composition/Information on Ingredients
Product Name & Other Names: l-Glutamic Acid Hydrochloride.
CAS No.: 138-15-8
EINECS EC Code: 205-315-9
4. First Aid Measures
Always seek medical attention after first aid measures are provided.
Inhalation: If inhaled, it will cause irritation and damage. Remove the victim to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: It will cause irritation and burns to mouth, digestive tract and stomach. Contact the medical center quickly. Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Causes skin burns. On contact, it can cause itching, pain, swelling and redness. Immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reusing. Thoroughly clean shoes before reuse.
Eye Contact: Causes eye burns. It can cause severe irritation and harm to the eyes. Check for and remove any contact lenses. Immediately flush your eyes with running water for at least 15 minutes, keeping eyelids open. Cold water may be used. Get medical attention.
Notes to Physician: Treat symptomatically.
5. Fire Fighting Measures
Fire: Toxic fumes, hydrogen chloride gas, nitrogen oxides, chlorine and complex material may be formed in fire.
Explosion: No data available. Explosive decomposition possible on heating.
Fire Extinguishing Media: Dry chemical, foam or carbon dioxide and water spray jet. For this substance/mixture no limitations of extinguishing agents are given.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes.
6. Accidental Release Measures
Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment cleanup procedures and Storage: Contain spilled material. Sweep up and shovel and dispose of as hazardous waste. Keep in suitable, closed containers for disposal. Avoid dust formation. Keep away from heat. Keep away from sources of ignition. Wear full protective equipment and ensure ventilation.
7. Handling and Storage
Precautions for safe handling: Keep away from heat and source of fire, preferably in a ventilated area. Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling it. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original containers. Keep air contact to a minimum. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong alkalis. oxidizing agents. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Store away from oxidizing agents. Moisture sensitive. Storage: Cool dry place.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: Not established.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to the substance is apparent and engineering controls are not feasible, consult an industrial hygienist. For emergencies, or instances where the exposure levels are not known, use a full-face piece positive-pressure, air-supplied respirator.
Skin Protection: Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection: Use chemical safety goggles and/or a full-face shield where splashing is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice.
9. Physical and Chemical Properties
Appearance: White crystalline powder.
Odor: No data found.
Odor threshold: No data found.
pH: No data found.
Relative density: No data found.
Boiling Point: No data found.
Melting Point: No data found.
Flash point: No data found.
Auto-ignition temperature: No data found.
Decomposition Temperature: No data found.
Upper/lower flammability or explosive limits: No data found.
Vapor pressure: No data found.
Vapor density: No data found..
Evaporation rate: No data found.
Flammability (solid, gas): No data found.
Partition coefficient: n-octanol/water: No data found.
Solubility(ies): No data found.
Viscosity: No data found.
Mutagenic Effects: No data found.
Developmental Toxicity: No data found.
Reproductive Effects: No data found.
Molecular Weight: 183.59
Chemical Formula: C5H9NO4-ClH
10. Stability and Reactivity
Stability: Stable under ordinary conditions of use and storage. Store away from oxidizing agents.
Hazardous Decomposition Products: Toxic fumes, hydrogen chloride gas, nitrogen oxides, chlorine and complex material may be formed in fire.
Hazardous Polymerization: Not reported.
Incompatibilities: Strong oxidizing agents.
Conditions to Avoid: Heat, flames, light, moisture, air, ignition sources and incompatibles.
11. Toxicological Information
LD50 Oral - Rat - male and female - > 5.110 mg/kg.
LD50 Dermal - Rat - male and female - > 2.000 mg/kg.
Carcinogenicity: Not listed as a carcinogen by ACGIH, IARC, NTP, or CA Prop 65.
Reproductive Toxicity: No data found.
Developmental Effects: No data found.
Teratogenicity: No data found.
12. Ecological Information
Toxicity to fish: static test LC50 - Cyprinus carpio (Carp) - > 100 mg/l - 96 h.
Toxicity to daphnia and other aquatic invertebrates: static test EC50 - Daphnia magna (Water flea) - > 100 mg/l - 48 h.
Persistence and Degradability: No data found.
Mobility: Will be mobile in the environment due to its volatility.
Results of PBT and vPvB assessment: No data found.
Environmental Toxicity: No data found.
13. Disposal Considerations
Whatever cannot be saved for recovery, or recycling should be managed in an appropriate and approved waste disposal facility.
14. Transport Information
DOT USA, TDG Canada & ADR/RID Europe: Not Controlled.
IMDG/IMO & IATA/ICAO: Not Controlled.
15. Regulatory Information
USA:
SARA 311/312: See section 2.
California Prop 65: Not listed.
Section 16 - Additional Information
European Labeling in Accordance with EC Directives:
H314: Causes severe skin burns and eye damage.
Please visit SDS Safety Data Sheet of l-Glutamic Acid Hydrochloride or l-Glutamic Acid HCl Suppliers.
American Molecules, also known as ammol.org is a distributor, supplier and manufacturers' representative of all types of Pharmaceuticals, Functional Ingredients, Excipients and Specialty Chemicals in Texas USA. Our principals manufacture supply and export USP NF BP, Ph Eur, etc grades of chemicals pure and reagent grade, mineral fortifiers, FCC food grade. Tailor made particle size and customized specifications are offered. The principal's facility is having one or more of the certifications like FDA approval and GLP, cGMP, ISO9001, ISO14001, ISO/IEC 17025, ISO22000, FSSC 22000, ISO45001, FSSAI, Kosher, HALAL, COPP, WHO-GMP certified and Written Confirmation (WC) for export to Europe is available. The manufacturers suppliers and exporters observe WHO Good Manufacturing Practices and Good Laboratory Practices.
Suppliers and Manufacturers' Representative:
9910 Bent Oak Dr
Houston, TX 77040, USA
Call Toll Free: 1-855-55-AMMOL 1-855-552-6665
Email: info@ammol.org