 |
Sodium Iodate SDS Safety Data Sheet of Supplier Exporter Manufacturers' Representative |
Email: info@ammol.org |
Call Toll Free +1-855-552-6665 |
Sodium Iodate
CAS Number: 7681-55-2
Molecular Formula: NaIO3
Molecular Weight: 197.89
Sodium Iodate
Sodium Iodate SDS MSDS Sheet, Material safety Data Sheet 13-Feb-236
1. Product Identification
CAS No.: 7681-55-2
EINECS: EC Number: 231-672-5
Synonyms: Iodic Acid Sodium Salt.
Molecular Weight: 197.89
Chemical Formula: NaIO3
Recommended usage: Industrial Manufacturing.
Supplier: American Molecules, 9910 Bent Oak Dr, Houston, TX 77040, USA.
Call Toll Free: 1-855-55-AMMOL 1-855-552-6665.
In case of emergency contact: Will be given with the supply.
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Oxidizing Solids Category 3
Skin corrosion/irritation Category 2
Serious eye damage/eye irritation Category 2A
Specific target organ toxicity, single exposure; Respiratory tract irritation Category 3
Labeling according to GHS & Regulation (EC) No 1272/2008
GHS Label Elements Oxidizing Solid | GHS Label Elements  Irritant | GHS Label Elements  Health Hazard |
Signal Word: Danger
Hazard Statements:
H272 - May intensify fire; oxidizer
H302 - Harmful if swallowed
H317 - May causes allergic skin irritation
H320 - Causes eye irritation
H334 - May cause allergy or asthma symptoms or breathing difficulties if inhaled.
Precautionary Statements - Prevention
P210: Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
P220: Keep/Store away from clothing/combustible materials
P221: Take any precaution to avoid mixing with combustibles
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P264: Wash face, hands and any exposed skin thoroughly after handling
P280: Wear protective gloves/ protective clothing/ eye protection/ face protection
Precautionary Statements - Response
P301+P312: IF SWALLOWED: Call a POISON CENTER or doctor if you feel unwell.
P302+P352: IF ON SKIN: Wash with plenty of water.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P333+P313: If skin irritation or rash occurs: Get medical advice/ attention.
P337+P313: If eye irritation persists: Get medical advice/ attention
P342+311: If experiencing respiratory symptoms: Call a POISON CENTER or doctor/physician.
P370+P378: In case of fire: Use water spray for extinction.
Precautionary Statements - Storage
P501: Dispose of contents/container in accordance with local, regional, national, international regulations.
OSHA Hazards: Oxidizer. This product is considered a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200.
3. Composition/Information on Ingredients
Ingredient: Sodium Iodate
CAS No.: 7681-55-2
EINECS: EC Number: 231-672-5
Percent: 97 - 100%
4. First Aid Measures
Always seek medical attention after first aid measures are provided.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
Note to Physician: Symptomatic and supportive treatment is recommended.
5. Fire Fighting Measures
Flammability of the Product: Non-flammable but it is an oxidizer.
Products of Combustion: It emits toxic oxides of Iodine, Sodium Oxide, Hydrogen Iodide and fumes when heated to decomposition.
Fire: It is supporting fire as an oxidizer.
Explosion: Contact with oxidizable substances may cause explosion.
Fire Extinguishing Media: Water spray, Foam. Use means suitable for extinguishing surrounding fire. Avoid carbon dioxide and gas filled extinguisher. Water should be preferred.
Special Information: It is an oxidizer. In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures or when moistened under fire conditions, it may produce toxic or irritating fumes.
6. Accidental Release Measures
Eliminate all sources of ignition. Avoid dust formation. Avoid breathing dust. Do not let the product enter drains. Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow evacuating through the sanitary system if local laws permit.
7. Handling and Storage
Do not breathe dust. Wear suitable protective clothing. In case of insufficient ventilation, wear suitable respiratory equipment.
Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Wash hands thoroughly after handling. Provide appropriate exhaust ventilation at places where dust is formed. If you feel unwell, seek medical attention. Keep in a tightly closed container, stored in a cool <32C, dry, ventilated area. Protect against physical damage heat or contact with combustible substances.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: None established. by regulatory bodies.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice.
9. Physical and Chemical Properties
Appearance: White crystals or powder.
Odor: None.
Odor threshold: Not applicable.
Solubility: Soluble in water.
pH: near 5 to 9 at 19.8 g/l at 25 °C
Relative Density: 4.28 at 25C.
Melting Point: No data found.
Boiling Point: No data found.
Flash point: No data found.
Auto-ignition temperature: No data found.
Decomposition temperature: No data found.
Upper/lower flammability or explosive limits: No data found.
% Volatile by volume @ 21C (70F): 0
Melting Point: No data found.
Vapor pressure: No data found.
Vapor density: No data found.
Evaporation rate: No data found.
Flammability (solid, gas): No data found.
Partition coefficient: n-octanol/water: No data found.
Solubility: Soluble in water.
Viscosity: No data found.
10. Stability and Reactivity
Stability: It is stable under ordinary conditions of use and storage. It becomes unstable by heat.
Hazardous Decomposition Products: Oxygen, oxides of Sodium, Iodine oxides, Hydrogen Iodide and fumes.
Hazardous Polymerization: Will not occur.
Incompatibilities: Organic substances, Strong reducing agents, Acids, Powdered metals, Strong bases, Alcohols, phosphorous, Anhydrides, Halogens, Acids Metal powders and Reducing agents. Heat.
Conditions to Avoid: Heat, Incompatibles.
11. Toxicological Information
Toxicity to Animals:
Oral LD50: 505 mg/kg (Mouse)
Carcinogenic Effects: Not a reported carcinogen.
Teratogenic Effects: Not available..
Chronic Effects on Humans: Not available.
12. Ecological Information
Toxicity to fish: LC50 - Oncorhynchus mykiss (rainbow trout) - 220 mg/l - 96 h.
No other adverse environmental effects (e.g. ozone depletion, photochemical ozone creation potential, endocrine disruption, global warming potential) are expected from this component.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements. Small amounts of this material may be suitable for sanitary sewer or trash disposal.
14. Transport Information
DOT (USA) & ADR/RID
Shipping Name: Sodium Iodate
Hazard Class: 5.1
UN Number: UN1479
Hazard Label: Oxidizer
Packing Group: II
IMDG
Shipping Name: Sodium Iodate
Hazard Class: 5.1
UN Number: UN3377
Hazard Label: Oxidizing Agent
Marine pollutant: No
Packing Group: III
IATA
Shipping Name: Sodium Iodate
Hazard Class: 5.1
UN Number: UN3377
Hazard Label: Oxidizer
Packing Group: III
USA:
SARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
Section 313: No chemicals are reportable under Section 313.
SARA 311/312 Hazards: See section 2.
Canada WHMIS: CLASS C D2B Oxidizing material.
CAS# 7758-05-6 is not listed on Canada's Ingredient Disclosure List.
CAS# 7758-05-6 is listed on Canada's DSL List
16. Other Information
Hazard Statements:
H272 - May intensify fire; oxidizer
H302 - Harmful if swallowed
H317 - May causes allergic skin irritation
H320 - Causes eye irritation
H334 - May cause allergy or asthma symptoms or breathing difficulties if inhaled.
Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************
Please visit Main Data of Sodium Iodate Suppliers.
American Molecules, also known as ammol.org is a distributor, supplier and manufacturers' representative of all types of Pharmaceuticals, Functional Ingredients, Excipients and Specialty Chemicals in Texas USA. Our principals manufacture supply and export USP NF BP, Ph Eur, etc grades of chemicals pure and reagent grade, mineral fortifiers, FCC food grade. Tailor made particle size and customized specifications are offered. The principal's facility is having one or more of the certifications like FDA approval and GLP, cGMP, ISO9001, ISO14001, ISO/IEC 17025, ISO22000, FSSC 22000, ISO45001, FSSAI, Kosher, HALAL, COPP, WHO-GMP certified and Written Confirmation (WC) for export to Europe is available. The manufacturers suppliers and exporters observe WHO Good Manufacturing Practices and Good Laboratory Practices.
Suppliers and Manufacturers' Representative:
9910 Bent Oak Dr
Houston, TX 77040, USA
Call Toll Free: 1-855-55-AMMOL 1-855-552-6665
Email: info@ammol.org