American Molecules - Ammol.org USA

Acetic Acid Glacial Supplier's SDS Safety Data Sheet

Call Toll Free +1-855-552-6665
Toll Free: 1-855-55-AMMOL

Glacial Acetic Acid
CAS Number: 64-19-7

Molecular Formula: CH3CO2H ,
Molecular Weight: 60.05

Glacial Acetic Acid SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet
 04-Feb-24

Section 1 - Chemical Product and Company Identification

Product Name & Other Names: Glacial Acetic Acid or Acetic Acid or Ethanoic acid or Ethylic acid or Methanecarboxylic acid or Vinegar.
CAS#: 64-19-7
EINECS EC Number: 200-580-7
Relevant uses and uses advised against (if any)
: Industrial Manufacturing.
Supplier: American Molecules, 9910 Bent Oak Dr, Houston, TX 77040, USA.
Call Toll Free: 1-855-55-AMMOL 1-855-552-6665
In case of emergency contact: Will be given with the supply.

Section 2 - Hazards Identification

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Flammable liquids (Category 3) H227
Skin corrosion/irritation (Category 1A, B, C) H314
Acute aquatic toxicity (Category 3) H402

Labeling according to GHS & Regulation (EC) No 1272/2008

GHS Label Elements
flammable
Combustible Liquid

GHS Label Elements
corrosive
Corrosive

Signal Words (GHS-US): Danger

Hazard statements (GHS-US):
H227: Combustible liquid.
H314: Causes severe skin burns and eye damage.
H402: Harmful to aquatic life.

Precautionary statements (GHS-US):
P210: Keep away from heat, sparks, open flames, hot surfaces. - No smoking.
P260: Do not breathe mist, vapors, spray.
P280: Wear protective clothing, protective gloves, eye protection, face protection.
P301+P330+P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
P303+P361+P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304+P340: IF INHALED: remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+P351+P338: If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+ P313: If eye irritation persists: Get medical advice/ attention.
P370+P378: In case of fire: Use carbon dioxide (CO2), powder, alcohol-resistant foam for extinction.
P403+P235: Store in a well-ventilated place. Keep cool.

Section 3 - Composition/Information on Ingredients

Product Name & Other Names: Glacial Acetic Acid or Acetic Acid or Ethanoic acid or Ethylic acid or Methanecarboxylic acid or Vinegar.
CAS#: 64-19-7
EINECS EC Number: 200-580-7

Section 4 - First Aid Measures

Always consult a physician after the first aid is given.

Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid. Do NOT allow victim to rub or keep eyes closed.
Skin: Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Get medical aid if irritation develops or persists. Wash clothing before reuse.
Ingestion: Do NOT induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid.
Inhalation: Remove from exposure to fresh air immediately. If breathing is difficult, give oxygen. Get medical aid. Do NOT use mouth-to-mouth resuscitation. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Notes to Physician: Treat symptomatically and supportively.

Section 5 - Fire Fighting Measures

General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Flammability: Flammable. Explosive in presence of oxidizing materials.
Flash Point: 40C 104F
Auto Ignition Temperature: 463C 865F
Extinguishing Media: Use DRY chemical powder, alcohol foam, water spray or fog. Cool containing vessels with water jet to prevent pressure build-up, auto-ignition, or explosion.

Section 6 - Accidental Release Measures

Personal precautions, protective equipment, and emergency procedures: Ventilate area of leak or spill. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep-up and remove to an approved disposal container. Neutralize with sodium bicarbonate or calcium hydroxide or dry soda ash or calcium carbonate and deposit in a sealed bag or container. Use water spray to dilute spill to a non-flammable mixture. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation.

Section 7 - Handling and Storage

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents, strong alkalis, and metals. Store protected from heat and flames.

Section 8 - Exposure Controls, Personal Protection

Airborne Exposure Limits: Airborne Exposure Limits:
OSHA Permissible Exposure Limit (PEL): 10 ppm (TWA).
ACGIH Threshold Limit Value (TLV): 10 ppm (TWA); 15 ppm (STEL).
NIOSH 10ppm TWA; 25 mg/m3 TWA 50ppm IDLH
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn.
Skin Protection: Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area of Acetic acid.

Section 9 - Physical and Chemical Properties

Appearance: Clear Liquid
Odor: Vinegar odor
Odor threshold: Not available.
pH: 2 for 1% solution, 2.4 (1.0M solution)
Relative density: around 1.05
Boiling Point: 118C (244.5F)
Melting Point:
 16.6C (61.9F).
Flash point: No data found.
Auto-ignition temperature: No data found.
Decomposition temperature: No data found.
Upper/lower flammability or explosive limits: No data found.
Vapor pressure: No data found.
Vapor density: No data found.
Evaporation rate: No data found.
Flammability (solid, gas): No data found.
Partition coefficient: n-octanol/water: No data found.
Solubility: Soluble in water
Viscosity: No data found.

Section 10 - Stability and Reactivity

Chemical Stability: Stable under normal temperatures and pressures. It is hygroscopic.
Conditions to Avoid: Incompatible materials, dust generation, moisture, exposure to heat, spark, moist air or water.
Incompatibilities with Other Materials: Oxidizing agents, strong alkalis and metals.
Hazardous Decomposition Products: Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Will not occur.

Section 11 - Toxicological Information

Acute oral toxicity (LD50): 3310 mg/kg [Rat].
Acute dermal toxicity (LD50): 1060 mg/kg [Rabbit].
Acute toxicity of the vapor (LC50): 5620 1 hours [Mouse].
LC50 Inhalation - rat - 4 h - 11.4 mg/l 4 hours
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as possible or confirmed human carcinogen by IARC, ACGIH, OSHA and NTP.
Mutagenic Effects: No data found.
Teratogenic Effects: No data found.
Developmental Toxicity: No data found.
Reproductive Effects: No data found.

Section 12 - Ecological Information

Persistence and Degradability: The material will readily biodegrade.
Mobility: Mobile due to water solubility
Bioaccumulation/ Accumulation: Unlikely to bioaccumulate
Results of PBT and vPvB assessment: No data available for assessment.
Toxicity:
 (LC50): 423 mg/l 24 hours [Fish (Goldfish)]. 88 ppm 96 hours [Fish (fathead minnow)]. 75 ppm 96 hours [Fish (bluegill sunfish)]. >100 ppm - 96 hours [Daphnia].

Section 13 - Disposal Considerations

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility.

Section 14 - Transport Information

Land Transport DOT USA and ADR/RID Europe
UN number: 2789
Class: 8 (3)
Packing group: II
Proper shipping name: Acetic acid, glacial
Reportable Quantity (RQ): 5000 lbs
Marine pollutant: No
Poison Inhalation Hazard: No
Sea Trancport IMDG/IMO
UN number: 2789
Class: 8 (3)
Packing group: II
Proper shipping name: Acetic acid, glacial
Reportable Quantity (RQ): 5000 lbs
Marine pollutant: No
Air Transport IATA/ICAO
UN number: 2789
Class: 8 (3)
Packing group: II
Proper shipping name: Acetic acid, glacial.

Section 15 - Regulatory Information

USA:
SARA 311/312 Hazards
: See section 2.
California Prop. 65 Components: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.

Section 16 - Additional Information

European Labeling in Accordance with EC Directives:
H227 = Combustible liquid.
H314 = Causes severe skin burns and eye damage.
H402 = Harmful to aquatic life.

DISCLAIMER: The information and recommendations set forth herein are presented in good faith and believed correct as of the date hereof. It is compiled from various sources, and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules, or insurance requirements applicable. This SDS MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a professionally trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose. This shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. In no case shall our company be liable to loss or damages by the product user.

Please visit Main Page of Acetic Acid Glacial Suppliers.

American Molecules, also known as ammol.org is a distributor, supplier and manufacturers' representative of all types of Pharmaceuticals, Functional Ingredients, Excipients and Specialty Chemicals in Texas USA. Our principals manufacture supply and export USP NF BP, Ph Eur, etc grades of chemicals pure and reagent grade, mineral fortifiers, FCC food grade. Tailor made particle size and customized specifications are offered. The principal's facility is having one or more of the certifications like FDA approval and GLP, cGMP, ISO9001, ISO14001, ISO/IEC 17025, ISO22000, FSSC 22000, ISO45001, FSSAI, Kosher, HALAL, COPP, WHO-GMP certified and Written Confirmation (WC) for export to Europe is available. The manufacturers suppliers and exporters observe WHO Good Manufacturing Practices and Good Laboratory Practices.

Pallet Drums Bottles Pail Container

Suppliers and Manufacturers' Representative:
American Molecules - Ammol.org USA
9910 Bent Oak Dr
Houston, TX 77040, USA
Call Toll Free: 1-855-55-AMMOL 1-855-552-6665
Email: info@ammol.org