 |
| Home | Contact |
Ammonium Glycyrrhizinate or Ammonium Glycyrrhizate or Monoammonium Glycyrrhizinate SDS Safety Data Sheet of Supplier Exporter Manufacturers' Representative |
| Email: info@ammol.org |
| Call Toll Free +1-855-552-6665 Toll Free: 1-855-55-AMMOL |
Ammonium Glycyrrhizinate or Ammonium Glycyrrhizate
CAS Number: 53956-04-0
Molecular Formula: C42H61O16-NH4
Molecular Weight: 839.96
Ammonium Glycyrrhizinate or Ammonium Glycyrrhizate
Diisopropanolamine or Bis(2-hydroxypropyl)amine or 1,1'-Iminodi-2-propanol SDS MSDS Sheet
Material Safety Data Sheet 16-August-26
1 - Product Identification
p>Product Name & Other Names: Ammonium Glycyrrhizate or Ammonium Glycyrrhizinate or Monoammonium Glycyrrhizinate.CAS Number 53956-04-0
EINECS EC Number: 258-887-7
Molecular Formula: C42H61O16-NH4
Molecular Weight: 839.96
Relevant uses and uses advised against (if any): Laboratory and Industrial Manufacturing.
Supplier: American Molecules, 9910 Bent Oak Dr, Houston, TX 77040, USA.
Call Toll Free: 1-855-55-AMMOL 1-855-552-6665.
In case of emergency contact: Will be given with the supply.
2 - Hazards identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Eye irritation (Category 2A), H319
Labeling according to GHS USA & Regulation (EC) No 1272/2008
GHS Label Elements Irritant |
Signal Words: Warning
Hazard statements:
H319: Causes serious eye irritation.
Precautionary statements:
P261 Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P270 Do not eat, drink, or smoke when using this product.
P273 Avoid release to the environment.
P333+313 If skin irritation or a rash occurs: Get medical advice/attention.
P302+P352 IF ON SKIN: Wash with plenty of soap and water.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+P313 If eye irritation persists: Get medical advice/ attention.
P501 Dispose of contents/container to authorized agents only.
3 - Composition / information on ingredients
Product Name & Other Names: Ammonium Glycyrrhizate or Ammonium Glycyrrhizinate or Monoammonium Glycyrrhizinate.
CAS Number 53956-04-0
EINECS EC Number: 258-887-7
4 - First aid measures
Always seek medical attention after first aid measures are provided.
Eye contact: Immediately flush eyes with plenty of clean waterfor an extended time, not less than five (5) minutes. Flush longer if there is any indication of residual chemical in the eye. Ensure adequate flushing of the eyes by separating the eyelids with fingers androll eyes in a circular motion.
Skin contact: Immediately remove contaminated clothing and shoes. Wash the affected area with plenty of soap and water until no evidence of the chemical remains. Launder clothing before reuse. If irritation develops, call a physician.
Inhalation: If affected, remove to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration.
Ingestion: Do not induce vomiting. Rinse out the mouth with water. Never give anything by mouth to an unconscious person. Get medical attention immediately.
5 - Firefighting measures
Fire and explosive properties: Combustible. Will burn at high temperatures.
Extinguishing media: Use water spray, ABC dry chemical, foam, or carbon dioxide. Use water to keep fire-exposed containers cool. Water spray may be used to flush spills away from exposures.
Fire-fighting instructions: Wear self-contained breathing apparatus (SCBA) equipped with a full-face piece and operated in a pressure-demand mode (or other positive pressure mode) and approved protective clothing. Personnel without suitable respiratory protection must leave the area to prevent significant exposure to hazardous gases from combustion, burning, or decomposition.
Unusual fire/explosion hazards: Irritating or toxic substances may be emitted upon burning, combustion or decomposition.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes.
6 - Accidental release measures
Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment, cleanup procedures, and Storage: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep up and move to an approved disposal container. Avoid open flames or other sources of ignition.
7 - Handling and storage
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling it. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original containers. Keep air contact to a minimum. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong acids and oxidizing agents. Storage: Room Temperature. Preferably refrigerate 2C to 8C. OK to freeze. Shipping may be ambient. Avoid light and moisture.
Fire Protection: Keep away from ignition sources and naked flame. Keep away from heat, sparks, and open flames.
8 - Exposure controls / personal protection
Exposure Limits: Not established.
Respiratory Protection: Avoid breathing directly on the product. Apply local ventilation when appropriate.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice.
9 - Physical and chemical properties
Appearance: White to off-white powder or crystals. Hygroscopic.
Odor: Odorless.
Odor threshold: Not applicable.
pH: No data found.
Relative density: No data found.
Boiling point C: 249C literature.
Melting point: 217C literature.
Flash point: No data found.
Auto-ignition temperature: No data found.
Decomposition temperature: No data found.
Upper/lower flammability or explosive limits: No data found.
Vapor pressure: No data found.
Vapor density: No data found.
Evaporation rate: No data found.
Flammability (solid, gas): No data found.
Partition coefficient: n-octanol/water: No data found.
Solubility(ies): Slightly soluble in water; very slightly soluble in anhydrous ethanol; practically insoluble in acetone. It dissolves in dilute solutions of acids and of alkali hydroxides.
Viscosity: No data found.
10 - Stability and reactivity
Stability: This product is stable under recommended conditions of use and storage.
Hazardous polymerization: Hazardous polymerization will not occur.
Conditions to avoid: Excessive heat and ignition sources.
Incompatibility with other materials: Avoid contact with strong oxidizing agents and acids.
Hazardous decomposition products: Carbon dioxide and carbon monoxide.
11 - Toxicological information
LD50 Oral: No data found.
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as possible or confirmed human carcinogen by IARC, ACGIH, OSHA and NTP.
Teratogenic Effects: No data found.
Mutagenic Effects: No data found.
Developmental Toxicity: No data found.
Reproductive Effects: No data found.
12 - Ecological information
Toxicity to fish: No data found.
Results of PBT and vPvB assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative, and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
13 - Disposal information
Incinerate waste product when in liquid form (i.e., as supplied) in a properly permitted (approved) incineration facility in accordance with local regulations. Liquids cannot be disposed of in a landfill. Do not release to waterways.
14 - Transportation information
DOT USA, TDG Canada & ADR/RID Europe: Not controlled.
IMDG/IMO: Not controlled.
IATA/ICAO: Not controlled.
15 - Regulatory information
USA:
US - California Proposition 65 - Carcinogens & Reproductive Toxicity (CRT): Not listed for cancer, birth defects or reproductive harm.
16. Other Information
Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************
Please visit Main Page of Ammonium Glycyrrhizinate or Ammonium Glycyrrhizate Suppliers.
American Molecules, also known as ammol.org is a distributor, supplier and manufacturers' representative of all types of Pharmaceuticals, Functional Ingredients, Excipients and Specialty Chemicals in Texas USA. Our principals manufacture supply and export USP NF BP, Ph Eur, etc grades of chemicals pure and reagent grade, mineral fortifiers, FCC food grade. Tailor made particle size and customized specifications are offered. The principal's facility is having one or more of the certifications like FDA approval and GLP, cGMP, ISO9001, ISO14001, ISO/IEC 17025, ISO22000, FSSC 22000, ISO45001, FSSAI, Kosher, HALAL, COPP, WHO-GMP certified and Written Confirmation (WC) for export to Europe is available. The manufacturers suppliers and exporters observe WHO Good Manufacturing Practices and Good Laboratory Practices.
Suppliers and Manufacturers' Representative:
9910 Bent Oak Dr
Houston, TX 77040, USA
Call Toll Free: 1-855-55-AMMOL 1-855-552-6665
Email: info@ammol.org