Diethyl Phthalate USP Grade Supplier Exporter Manufacturers' Representative
Email: info@ammol.orgCall Toll Free +1-855-552-6665
Toll Free: 1-855-55-AMMOLDiethyl Phthalate
CAS Number: 84-66-2
Molecular Formula: C12H14O4 or C6H4-1,2-(CO2C2H5)2
Molecular Weight: 222.24
Diethyl PhthalateSpecifications of Diethyl Phthalate USP NF Grade:
C12H14O4 --- 222.24
1,2-Benzenedicarboxylic acid, diethyl ester;
Diethyl phthalate --- CAS 84-66-2DEFINITION
Diethyl Phthalate contains NLT 98.0% and NMT 102.0% of diethyl phthalate (C12H14O4), calculated on the anhydrous basis. [Caution— Avoid contact. ]IDENTIFICATION
A. Infrared Absorption: On undried specimenASSAY
Procedure:
Sample: 1.5 g
Titrimetric system
Mode: Residual titration
Titrant: 0.5 N alcoholic potassium hydroxide
Back-titrant: 0.5 N hydrochloric acid
Endpoint detection: Visual
Analysis: Transfer the Sample to a flask, add 50.0 mL of the Titrant, and boil with a reflux condenser on a water bath for 1 h. Add 20 mL of water, then add phenolphthalein. Titrate the excess potassium hydroxide with the Back-titrant. Perform a blank determination. Each mL of 0.5 N potassium hydroxide is equivalent to 55.56 mg of diethyl phthalate (C12H14O4 ).
Acceptance criteria: 98.0%–102.0% on the anhydrous basis.Residue on Ignition:
Sample: 10 g
Analysis: Gently heat the Sample until the liquid has evaporated, and ignite the residue to constant weight.
Acceptance criteria: NMT 0.02%
Specific Gravity: 1.118–1.122 at 20C
Refractive Index: 1.500–1.505 at 20C
Acidity:
Sample: 20.0 g
Analysis: Mix the Sample with 50 mL of alcohol that previously has been neutralized to a phenolphthalein endpoint, and titrate with 0.1 N sodium hydroxide to a phenolphthalein endpoint.
Acceptance criteria: NMT 0.50 mL is required for neutralization.
Water Determination, Method I: NMT 0.2%We also manufacture and supply Diethyl Phthalate of BP Ph Eur EP Grade.
Please visit SDS Safety Data Sheet of Diethyl Phthalate Suppliers.
American Molecules, also known as ammol.org is a distributor, supplier and manufacturers' representative of all types of Pharmaceuticals, Functional Ingredients, Excipients and Specialty Chemicals in Texas USA. Our principals manufacture supply and export USP NF BP, Ph Eur, etc grades of chemicals pure and reagent grade, mineral fortifiers, FCC food grade. Tailor made particle size and customized specifications are offered. The principal's facility is having one or more of the certifications like FDA approval and GLP, cGMP, ISO9001, ISO14001, ISO/IEC 17025, ISO22000, FSSC 22000, ISO45001, FSSAI, Kosher, HALAL, COPP, WHO-GMP certified and Written Confirmation (WC) for export to Europe is available. The manufacturers suppliers and exporters observe WHO Good Manufacturing Practices and Good Laboratory Practices.
Suppliers and Manufacturers' Representative:
9910 Bent Oak Dr
Houston, TX 77040, USA
Call Toll Free: 1-855-55-AMMOL 1-855-552-6665
Email: info@ammol.org