 |
Benzalkonium Chloride Powder Solution SDS Safety Data Sheet Supplier Exporter Manufacturers' Representative |
Email: info@ammol.org |
Call Toll Free +1-855-552-6665 |
Quick Links to Products: Aluminum Chloride | Benzoic Acid | Benzoyl Peroxide | Benzyl Alcohol | Benzyl Benzoate | Benzododecinium Bromide | Benzalkonium Chloride | Chromic Chloride | Magnesium Chloride | and more -- |
Benzalkonium Chloride Powder Solution
CAS Number: 8001-54-5 or 63449-41-2
Molecular Formula: Varies
Molecular Weight: Varies
Benzalkonium Chloride Powder Solution
Benzalkonium Chloride SDS Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet 04-Feb-24
1. Product Identification
Product Name & Other Names: Benzalkonium Chloride, BZK, BKC, BAC, alkyldimethylbenzylammonium chloride and ADBAC
CAS No.: 8001-54-5 or 63449-41-2
EINECS EC Code: 264-151-6
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Supplier: American Molecules, 9910 Bent Oak Dr, Houston, TX 77040, USA.
Call Toll Free: 1-855-55-AMMOL 1-855-552-6665.
In case of emergency contact: Will be given with the supply.
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Acute toxicity, Oral (Category 3), H301
Acute toxicity, Dermal (Category 4), H312
Skin corrosion (Category 1B), H314
Chronic aquatic toxicity (Category 1), H410
Labeling according to GHS USA & Regulation (EC) No 1272/2008
GHS Label Elements  Toxic |
GHS Label Elements |
GHS Label Elements |
Signal Word: Danger
Hazard Statements:
H301: Toxic if swallowed
H312: Harmful in contact with skin.
H314: Causes severe skin burns and eye damage.
H410: Very toxic to aquatic life with long lasting effects.
Precautionary Statements
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P264: Wash ... thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P271: Use only outdoors or in a well-ventilated area.
P272: Contaminated work clothing should not be allowed out of the workplace
P273 Avoid release to the environment.
P280-Wear protective gloves/protective clothing/eye protection/face protection.
P301+P310+330: IF SWALLOWED: Rinse mouth and immediately call a POISON CENTER or doctor/physician.
P303 + P361 + P352 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Wash with plenty of soap and water.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P332+P313: If skin irritation occurs: Get medical advice/attention.
P337+P313 If eye irritation persists: Get medical advice/ attention.
3. Composition/Information on Ingredients
Product Name/Synonyms: Benzalkonium Chloride, BZK, BKC, BAC, alkyldimethylbenzylammonium chloride and ADBAC. >50% in water.
CAS No.: 8001-54-5 or 63449-41-2
EINECS EC Code: 264-151-6
4. First Aid Measures
Always seek medical attention after first aid measures are provided.
Inhalation: If inhaled, it will cause irritation and damage to nose and throat. Remove the victim to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: It will cause irritation and burns to mouth, digestive tract and stomach. Contact medical center quickly. Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: On contact, it can cause itching, pain, swelling and redness. Immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: It can cause severe damage to eyes. Check for and remove any contact lenses. Immediately flush eyes with running water for at least 15 minutes, keeping eyelids open. Cold water may be used. Get medical attention.
5. Fire Fighting Measures
Fire: Combustible.
Toxic fumes, nitrogen oxides, carbon dioxide and carbon monoxide may be formed in fire.
Fire Extinguishing Media: Dry chemical, foam or carbon dioxide or water jet.
Unsuitable extinguishing media: Do not use a direct stream of water to extinguish.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Personal precautions, protective equipment, and emergency procedures: Ventilate area of leak or spill. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep-up and remove to an approved disposal container. Avoid mist formation. Keep away from heat. Keep away from sources of ignition. Provide ventilation. Wear full protective equipment and ensure proper ventilation.
7. Handling and Storage
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents and strong acids & alkalis and reducing agents. Keep away from heat and source of fire preferably in a ventilated area. Keep in tightly closed container. Do not breathe mist or dust. Do not store near food items.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: Contains no substances with occupational exposure limit values.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to the substance is apparent and engineering controls are not feasible, consult an industrial hygienist.
Skin Protection: Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection: Use chemical safety goggles and/or a full face shield where splashing is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.
9. Physical and Chemical Properties
Appearance: Colorless to slightly yellow liquid. (Anhydrous material is white to off-white powder).
Odor: Characteristic smell.
Odor threshold: No data found.
pH: 5 to 9.
Relative density: 0.97 approximate.
Melting point/freezing point: No data found.
Boiling Point: >100C
Flash point: No data found.
Auto-ignition temperature: No data found.
Decomposition temperature: No data found.
Upper/lower flammability or explosive limits: No data found.
Vapor pressure: No data found.
Vapor density: No data found.
Evaporation rate: No data found.
Flammability (solid, gas): No data found.
Partition coefficient: n-octanol/water: No data found.
Solubility: miscible with water
Viscosity: No data found.
10. Stability and Reactivity
Stability: Stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Toxic fumes, nitrogen oxides, carbon dioxide and carbon monoxide may be formed in fire.
Hazardous Polymerization: Not reported.
Incompatibilities: Strong acids & alkalis, oxidizing & reducing agents, heat and sparks. Hygroscopic. Also incompatible with nitrates, anion detergents.
Conditions to Avoid: Heat, flames, ignition sources and incompatibles.
11. Toxicological Information
Toxic if swallowed; Harmful in contact with skin; Causes severe skin burns and eye damage.
Oral rat LD50: 240 mg/kg
Dermal rat LD50: 1420 mg/kg.
Reproductive Effects: No data found.
Developmental Effects: No data found.
Teratogenicity: No data found.
Carcinogenicity: The product is not listed as carcinogen by OSHA, IARC, ACGIH or NTP.
12. Ecological Information
Environmental Toxicity: Very toxic to aquatic life with long lasting effects.
Toxicity to fish:
mortality LOEC - Oncorhynchus kisutch - 17.8 mg/l - 3.0 d
LC50 - Lepomis macrochirus - 0.31 mg/l - 96.0 h
mortality NOEC - Oncorhynchus kisutch - 10 mg/l - 3.0 d.
Results of PBT and vPvB assessment: No data found.
Persistence and degradability: No data found.
Mobility in soil: No data found.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility.
14. Transport Information
Land Transport USA DOT TDG Canada & ADR/RID Europe:
UN Number: 3261
Proper shipping name: Corrosive liquid, acidic, organic. NOS (Benzyl-C12-14-alkyldimethylammonium chlorides)
Class: 8, Packing group: II.
Sea Transport IMO/IMDG:
UN Number: 3261
Proper shipping name: Corrosive liquid, acidic, organic. NOS (Benzyl-C12-14-alkyldimethylammonium chlorides)
Class: 8, Packing group: II.
Air Transport ICAO/IATA:
UN Number: 3261
Proper shipping name: Corrosive liquid, acidic, organic. NOS (Benzyl-C12-14-alkyldimethylammonium chlorides)
Class: 8, Packing group: II.
15. Regulatory Information
USA:
SARA 311/312 Hazards: See section 2.
California Prop. 65 Components: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.
Section 16 - Additional Information
European Labeling in Accordance with EC Directives:
H301: Toxic if swallowed
H312: Harmful in contact with skin.
H314: Causes severe skin burns and eye damage.
H410: Very toxic to aquatic life with long lasting effects.
DISCLAIMER: The information and recommendations set forth herein are presented in good faith and believed correct as of the date hereof. It is compiled from various sources, and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules, or insurance requirements applicable. This SDS MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a professionally trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose. This shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. In no case shall our company be liable to loss or damages by the product user.
Please visit Main Page of Benzalkonium Chloride Powder Solution Suppliers.
American Molecules, also known as ammol.org is a distributor, supplier and manufacturers' representative of all types of Pharmaceuticals, Functional Ingredients, Excipients and Specialty Chemicals in Texas USA. Our principals manufacture supply and export USP NF BP, Ph Eur, etc grades of chemicals pure and reagent grade, mineral fortifiers, FCC food grade. Tailor made particle size and customized specifications are offered. The principal's facility is having one or more of the certifications like FDA approval and GLP, cGMP, ISO9001, ISO14001, ISO/IEC 17025, ISO22000, FSSC 22000, ISO45001, FSSAI, Kosher, HALAL, COPP, WHO-GMP certified and Written Confirmation (WC) for export to Europe is available. The manufacturers suppliers and exporters observe WHO Good Manufacturing Practices and Good Laboratory Practices.
Suppliers and Manufacturers' Representative:
9910 Bent Oak Dr
Houston, TX 77040, USA
Call Toll Free: 1-855-55-AMMOL 1-855-552-6665
Email: info@ammol.org