Micro Encapsulated Ammonium Persulfate Fracturing Chemicals Grade Supplier Exporter Manufacturers' Representative
Email: info@ammol.orgCall Toll Free +1-855-552-6665
Toll Free: 1-855-55-AMMOLMicro Encapsulated Ammonium Persulfate Fracturing Chemicals
CAS Number: Mixture
Micro Encapsulated Ammonium Persulfate Fracturing ChemicalsSpecifications of HT Encap or Encapsulated Breaker based on Ammonium Persulfate are as under:
Active matter: Ammonium persulfate 75-80%
Coating: 16-23%. Higher or lower coating percentage is preferred depending on down-hole temperatures.
Mesh size: 25-40mesh
Release time: Does not release at room temperature and negligible release up to 50°C or 125°F. Releases slowly when temperature is increased to 65°C or 150°F. Almost all the active matter will be released in 18 hours at 65°C. The material can be designed to give quick or slow release.Coated or Encapsulate Ammonium Persulfate, based coated chemical to be active at 140F or 60C called low temperature delayed release gel breaker is used for breaking gel up to temperatures of 200F or a little more.
Encap or Encapsulated Ammonium Persulfate is generally demanded for 3 different temperature ranges.
LT Encapsulated Breaker for downhole temperature of 100F (38C) to 120F (49C). This will have a coating of about 10.5 to 12.5% and active matter about 87 to 89%.
MT Encapsulated Breaker for for downhole temperature of 120F (49C) to 140F (60C). This will have a coating of about 13 to 16% and active matter about 83 to 86%.
HT Encapsulated Breaker for for downhole temperature of 140F (60C) to 200F (93C). This will have a coating of about 16.5 to 23% and active matter about 76 to 78%.Please visit SDS Safety Data Sheet of Micro Encapsulated Ammonium Persulfate Fracturing Chemicals Suppliers.
American Molecules, also known as ammol.org is a distributor, supplier and manufacturers' representative of all types of Pharmaceuticals, Functional Ingredients, Excipients and Specialty Chemicals in Texas USA. Our principals manufacture supply and export USP NF BP, Ph Eur, etc grades of chemicals pure and reagent grade, mineral fortifiers, FCC food grade. Tailor made particle size and customized specifications are offered. The principal's facility is having one or more of the certifications like FDA approval and GLP, cGMP, ISO9001, ISO14001, ISO/IEC 17025, ISO22000, FSSC 22000, ISO45001, FSSAI, Kosher, HALAL, COPP, WHO-GMP certified and Written Confirmation (WC) for export to Europe is available. The manufacturers suppliers and exporters observe WHO Good Manufacturing Practices and Good Laboratory Practices.
Suppliers and Manufacturers' Representative:
9910 Bent Oak Dr
Houston, TX 77040, USA
Call Toll Free: 1-855-55-AMMOL 1-855-552-6665
Email: info@ammol.org