Disodium Pyrosulfite or Sodium Metabisulfite USP NF Analytical Reagent FCC Food Grade Supplier Exporter Manufacturers' Representative
Email: info@ammol.orgCall Toll Free +1-855-552-6665
Toll Free: 1-855-55-AMMOLDisodium Pyrosulfite or Sodium Metabisulfite
CAS Number: 7681-57-4
Molecular Formula: Na2S2O5
Molecular Weight: 190.11
Disodium Pyrosulfite or Sodium MetabisulfiteSodium Metabisulfite USP NF Grade Specificatiosn
Na2S2O5 -- 190.11
Disulfurous acid, disodium salt.
Disodium pyrosulfite CAS 7681-57-4Sodium Metabisulfite contains an amount of Na2S2O5 equivalent to not less than 65.0 percent and not more than 67.4 percent of SO2.
Identification: A solution (1 in 20) responds to the tests for Sodium 191 and for Sulfite.
Limit of chloride: Dissolve 1.0 g in 10 mL of water, filter, if necessary, through a small chloride free filter, and add 6 mL of 30 percent hydrogen peroxide. Add 1 N sodium hydroxide until the solution is slightly alkaline to PhPh, dilute with water to 100 mL, and mix. Dilute 2.0 mL of this solution with water to 20 mL, and add 1 mL of nitric acid and 1 mL of silver nitrate TS. Mix, allow to stand for 5 minutes protected from direct sunlight, and compare the turbidity, if any, with that produced from a 2-mL aliquot of a control (prepared by diluting 0.71 mL of 0.020 N hydrochloric acid to 100 mL) in an equal volume of total solution containing the quantities of reagents used in the test : any turbidity produced by the test specimen does not exceed that of the control preparation (0.05%).
Iron: the limit is 0.002%.
Limit of thiosulfate: Mix 2.2 g with 10 mL of 1 N hydrochloric acid in a 50-mL beaker. Boil gently for 5 minutes, cool, and transfer to a small test tube. Any turbidity is not greater than that produced by 0.10 mL of 0.10 N sodium thiosulfate, similarly treated (0.05%).
Heavy metals: the limit is 0.002%.
Sodium Metabisulfite FCC Food Grade Specifications
Sodium Pyrosulfite
Na2S2O5 Formula weight 190.11
INS: 223 CAS 7681-57-4DESCRIPTION
Sodium Metabisulfite occurs as colorless crystals or as a white to yellow, crystalline powder. It is freely soluble in water and slightly soluble in alcohol. Its solutions are acid to litmus.
Function: Preservative; antioxidant.REQUIREMENTS
Identification: A 1:10 aqueous solution gives positive tests for Sodium and for Sulfite.
Assay: Not less than 90.0% and not more than 100.5% of Na2S2O5.
Iron: Not more than 10 mg/kg.
Lead: Not more than 2 mg/kg.
Selenium: Not more than 5 mg/kg.
Sodium Metabisulfite Analytical Reagent Grade Specifications
REQUIREMENTS
Disodium Disulfite
Na2S2O5
Formula Weight 190.11
CAS Number 7681-57-4
Assay: 97.0% minimum Na2S2O5MAXIMUM ALLOWABLE
Insoluble matter: 0.005%
Chloride (Cl): 0.05%
Thiosulfate (S2O3): 0.05%
Heavy metals (as Pb): 0.001%
Iron (Fe): 0.002%We also supply Sodium Pyrosulfite or Sodium Metabisulfite of BP Ph Eur Grade.
Please visit SDS Safety Data Sheet of Disodium Pyrosulfite or Sodium Metabisulfite Suppliers.
American Molecules, also known as ammol.org is a distributor, supplier and manufacturers' representative of all types of Pharmaceuticals, Functional Ingredients, Excipients and Specialty Chemicals in Texas USA. Our principals manufacture supply and export USP NF BP, Ph Eur, etc grades of chemicals pure and reagent grade, mineral fortifiers, FCC food grade. Tailor made particle size and customized specifications are offered. The principal's facility is having one or more of the certifications like FDA approval and GLP, cGMP, ISO9001, ISO14001, ISO/IEC 17025, ISO22000, FSSC 22000, ISO45001, FSSAI, Kosher, HALAL, COPP, WHO-GMP certified and Written Confirmation (WC) for export to Europe is available. The manufacturers suppliers and exporters observe WHO Good Manufacturing Practices and Good Laboratory Practices.
Suppliers and Manufacturers' Representative:
9910 Bent Oak Dr
Houston, TX 77040, USA
Call Toll Free: 1-855-55-AMMOL 1-855-552-6665
Email: info@ammol.org