Ferric Ammonium Citrate USP FCC Food Grade Supplier Exporter Manufacturers' Representative
Email: info@ammol.orgCall Toll Free +1-855-552-6665
Toll Free: 1-855-55-AMMOLFerric Ammonium Citrate
CAS Number: 1185-57-5
Molecular Formula: C6H5+4yFexNyO7
Molecular Weight: Varies
Ferric Ammonium CitrateFerric Ammonium Citrate USP Grade Specifications
Ferric Ammonium Citrate contains not less than 16.5 percent and not more than 18.5 percent of iron (Fe).
Identification:
A: Ignite about 0.5 g: it chars, and leaves a residue of iron oxide.
B: To 10 mL of a solution of Ferric Ammonium Citrate (1 in 100) add 6 N ammonium hydroxide drop wise: the solution darkens, but no precipitate forms.
C: To 5 mL of a solution of Ferric Ammonium Citrate (1 in 100) add 0.3 mL of potassium permanganate TS and 4 mL of mercuric sulfate TS, and heat the mixture to boiling: a white precipitate forms.
Ferric citrate: To a solution of Ferric Ammonium Citrate (1 in 100) add potassium ferrocyanide TS: no blue precipitate is formed.
Sulfate: 0.3% Maximum.
Oxalate: Transfer 1 g to a 125-mL separator, dissolve in 10 mL of water, add 2 mL of hydrochloric acid, and extract successively with one 50-mL portion and one 20-mL portion of ether. Transfer the combined ether extracts to a 150-mL beaker, add 10 mL of water, and remove the ether by evaporation on a steam bath. Add 1 drop of glacial acetic acid and 1 mL of calcium acetate solution (1 in 20): no turbidity is produced within 5 minutes.
Mercury: not more than 10 µg per g is found..
Limit of lead: not more than 10 µg per g is found.
Ferric Ammonium Citrate, Brown FCC Food Grade Specifications
Iron Ammonium Citrate
INS: 381 CAS 1185-57-5DESCRIPTION
Ferric Ammonium Citrate, Brown, occurs as thin, transparent brown, red-brown, or garnet red scales or granules, or as a brown-yellow powder. It is a complex salt of undetermined structure, composed of iron, ammonia, and citric acid. It is very soluble in water, but is insoluble in alcohol. The pH of a 1:20 aqueous solution is about 5.0 to 8.0. It is deliquescent in air and is affected by light.
Function: Nutrient.REQUIREMENTS
Identification:
A. A 500-mg sample, when ignited, chars and leaves a residue of iron oxide.
B. Add 0.3 mL of potassium permanganate TS and 4 mL of mercuric sulfate TS to 5 mL of a 1:10 aqueous solution, and heat the mixture to boiling. A white precipitate forms.
C. Dissolve about 500 mg of sample in 5 mL of water, and add 5 mL of 1 N sodium hydroxide. A red-brown precipitate forms, and ammonia is evolved when the mixture is heated.
Assay: Not less than 16.5% and not more than 18.5% of iron (Fe).
Ferric Citrate: Passes test.
Lead: Not more than 2 mg/kg.
Mercury: Not more than 1 mg/kg.
Oxalate: Passes test.
Sulfate: Not more than 0.3%.Please visit SDS Safety Data Sheet of Ferric Ammonium Citrate Suppliers.
American Molecules, also known as ammol.org is a distributor, supplier and manufacturers' representative of all types of Pharmaceuticals, Functional Ingredients, Excipients and Specialty Chemicals in Texas USA. Our principals manufacture supply and export USP NF BP, Ph Eur, etc grades of chemicals pure and reagent grade, mineral fortifiers, FCC food grade. Tailor made particle size and customized specifications are offered. The principal's facility is having one or more of the certifications like FDA approval and GLP, cGMP, ISO9001, ISO14001, ISO/IEC 17025, ISO22000, FSSC 22000, ISO45001, FSSAI, Kosher, HALAL, COPP, WHO-GMP certified and Written Confirmation (WC) for export to Europe is available. The manufacturers suppliers and exporters observe WHO Good Manufacturing Practices and Good Laboratory Practices.
Suppliers and Manufacturers' Representative:
9910 Bent Oak Dr
Houston, TX 77040, USA
Call Toll Free: 1-855-55-AMMOL 1-855-552-6665
Email: info@ammol.org