American Molecules - Ammol.org USA

Magnesium Citrate Dodecahydrate Nonahydrate Anhydrous USP Analytical Reagent Grade Supplier Exporter Manufacturers' Representative

Call Toll Free +1-855-552-6665
Toll Free: 1-855-55-AMMOL

Quick Links to Products:

Bismuth Citrate   |  Bismuth Subcitrate Potassium   |   Boron Citrate   |   Calcium ButyrateCalcium CitrateCitric AcidFerric Ammonium Citrate   |   Ferric Citrate & Ferrous Citrate  |   Magnesium Acetate  |  Magnesium Aluminum SilicateMagnesium Borogluconate  |  Magnesium Butyrate  |  Magnesium ChlorideMagnesium Citrate Suppliers  |  Magnesium Gluconate |  Magnesium Glycerophosphate  |  Potassium Citrate   |   Sodium Acid Citrate or Disodium Hydrogen Citrate   |   Sodium FormateSodium LactobionateSodium SeleniteSodium TartrateSodium Citrate   |   Sodium Dihydrogen Citrate or Monosodium Citrate Suppliers   |   Strontium Citrate   |   Triethyl Citrate   |   Zinc Citrate   |   and more --

Magnesium Citrate Dodecahydrate Nonahydrate Anhydrous
CAS Number: 3344-18-1 Anhydrous & 153531-96-5 Nonahydrate

Molecular Formula: C12H10Mg3-O14 Anhydrous
Molecular Weight: 451.11 Anhydrous

Magnesium Citrate Suppliers
Magnesium Citrate Dodecahydrate Nonahydrate Anhydrous

Magnesium Citrate USP Grade Specifications
C12H10Mg3O14 -- 451.11
1,2,3-Propanetricarboxylic acid, hydroxy-, magnesium salt (2:3).
Magnesium citrate (3:2) CAS Number 3344-18-1

Magnesium Citrate contains not less than 14.5 percent and not more than 16.4 percent of magnesium (Mg), calculated on the dried basis.

Labeling: Magnesium Citrate that loses not more than 2.0% of its weight in the test for Loss on drying may be labeled as Anhydrous Magnesium Citrate.
Identification:
A: A solution (10 mg per mL) responds to the tests for Magnesium.
B: A solution (80 mg per mL) responds to the tests for Citrate.
pH: between 5.0 and 9.0, in a suspension (50 mg per mL).
Loss on drying: Dry 1 g in a mechanical convection oven at 135 for 16 hours, then to constant weight: it loses not more than 29% of its weight, except that where it is labeled as anhydrous, it loses not more than 2.0% of its weight.
Chloride: A 300-mg portion shows no more chloride than corresponds to 0.20 mL of 0.020 N hydrochloric acid (0.05%).
Sulfate: A 100-mg portion shows no more sulfate than corresponds to 0.20 mL of 0.020N sulfuric acid (0.2%).
Arsenic: 3 6g per g.
Heavy metals: Dissolve 0.4 g in 25 mL of water, and proceed as directed for Test Preparation, except to use glacial acetic acid to adjust the pH: the limit is 50 6g per g.
Iron: Boil 50 mg with 5 mL of 2 N nitric acid for 1 minute. Cool, dilute with water to 45 mL, add 2 mL of hydrochloric acid, and mix: the limit is 200 6g per g.
Limit of calcium: the limit is 1.0%, calculated on the dried basis.

We also supply Magnesium Citrate Dodecahydrate Nonahydrate Anhydrous BP Ph Eur Grade.

Please visit SDS Safety Data Sheet of Magnesium Citrate Dodecahydrate Nonahydrate Anhydrous Suppliers.

American Molecules, also known as ammol.org is a distributor, supplier and manufacturers' representative of all types of Pharmaceuticals, Functional Ingredients, Excipients and Specialty Chemicals in Texas USA. Our principals manufacture supply and export USP NF BP, Ph Eur, etc grades of chemicals pure and reagent grade, mineral fortifiers, FCC food grade. Tailor made particle size and customized specifications are offered. The principal's facility is having one or more of the certifications like FDA approval and GLP, cGMP, ISO9001, ISO14001, ISO/IEC 17025, ISO22000, FSSC 22000, ISO45001, FSSAI, Kosher, HALAL, COPP, WHO-GMP certified and Written Confirmation (WC) for export to Europe is available. The manufacturers suppliers and exporters observe WHO Good Manufacturing Practices and Good Laboratory Practices.

Pallet Drums Bottles Pail Container

Suppliers and Manufacturers' Representative:
American Molecules - Ammol.org USA
9910 Bent Oak Dr
Houston, TX 77040, USA
Call Toll Free: 1-855-55-AMMOL 1-855-552-6665
Email: info@ammol.org