Iron (III) Chloride or Ferric Chloride Hexahydrate Anhydrous BP Ph Eur and Analytical Reagent Grade Supplier Exporter Manufacturers' Representative
Email: info@ammol.orgCall Toll Free +1-855-552-6665
Toll Free: 1-855-55-AMMOLFerric Chloride Hexahydrate Anhydrous
CAS Number: 10025-77-1 Hexahydrate and 7705-08-0 is Anhydrous
Molecular Formula: FeCl3-6H2O Hexahydrate
Molecular Weight: 270.3 Hexahydrate
Ferric Chloride Hexahydrate and Ferric Chloride AnhydrousFerric Chloride Hexahydrate is not in USP Monograph.
Ferric Chloride Hexahydrate Analytical Reagent Grade Specifications
Iron(III) Chloride Hexahydrate
FeCl3-6H2O
Formula Weight 270.30
CAS Number 10025-77-1REQUIREMENTS
Assay: 97.0-102.0% FeCl3-6H2OMAXIMUM ALLOWABLE
Insoluble matter: 0.01%
Nitrate (NO3): 0.01%
Phosphorus compounds (as PO4): 0.01%
Sulfate (SO4): 0.01%
Copper (Cu): 0.03%
Zinc (Zn): 0.03%
Ferrous iron (Fe++): Passes test.
Substances not precipitated by ammonium hydroxide (as sulfates): 0.1%
Ferric Chloride Hexahydrate BP Grade Ph Eur Grade Specifications
FeCl3-6H2O -- 270.3 -- CAS 10025-77-1DEFINITION
Content: 98.0 per cent to 102.0 per cent.CHARACTERS
Appearance: Crystalline mass or orange-yellow or brownish-yellow crystals, very hygroscopic.
Solubility: Very soluble in water and in ethanol (96 per cent), freely soluble in glycerol.IDENTIFICATION
A. It gives reaction of chlorides.
B. It gives reaction of iron.TESTS
Solution S: Dissolve 10 g in distilled water and dilute to 100 ml with the same solvent.
Acidity: In a suitable polyethylene container, dissolve 3.0 g of potassium fluoride in 15 ml of water. Titrate with 0.1 M sodium hydroxide using 0.1 ml of phph solution as indicator until a pink colour is obtained. Add 10 ml of solution S and allow to stand for 3 h. Filter and use 12.5 ml of the filtrate. Not more than 0.30 ml of 0.1 M sodium hydroxide is required to change the colour of the indicator to pink.
Free chlorine: Heat 5 ml of solution S. The vapour does not turn starch iodide paper blue.
Sulphates: Maximum 100 ppm.
Ferrous ions: Maximum 50 ppm.
Heavy metals: Maximum 50 ppm.
Specifications of Ferric Chloride Anhydrous:
Appearance: Greenish to Black, Crystalline powder
FeCl3 Assay: 98 %
Ferrous Salt as FeCl2: 0.10 % max
Insolubles: 0.50 % max.
Specific Gravity@25C: 2.80
Molecular weight: 162.5
Melting Point: 282C
Solubility: miscible in water.Please visit SDS Safety Data Sheet of Ferric Chloride Hexahydrate Suppliers.
Please visit SDS Safety Data Sheet of Ferric Chloride Anhydrous Suppliers.
American Molecules, also known as ammol.org is a distributor, supplier and manufacturers' representative of all types of Pharmaceuticals, Functional Ingredients, Excipients and Specialty Chemicals in Texas USA. Our principals manufacture supply and export USP NF BP, Ph Eur, etc grades of chemicals pure and reagent grade, mineral fortifiers, FCC food grade. Tailor made particle size and customized specifications are offered. The principal's facility is having one or more of the certifications like FDA approval and GLP, cGMP, ISO9001, ISO14001, ISO/IEC 17025, ISO22000, FSSC 22000, ISO45001, FSSAI, Kosher, HALAL, COPP, WHO-GMP certified and Written Confirmation (WC) for export to Europe is available. The manufacturers suppliers and exporters observe WHO Good Manufacturing Practices and Good Laboratory Practices.
Suppliers and Manufacturers' Representative:
9910 Bent Oak Dr
Houston, TX 77040, USA
Call Toll Free: 1-855-55-AMMOL 1-855-552-6665
Email: info@ammol.org