 |
Phenyl Ethanol or Phenylethyl Alcohol or Phenethyl Alcohol USP Grade Supplier Exporter Manufacturers' Representative |
Email: info@ammol.org |
Call Toll Free +1-855-552-6665 |
Phenyl Ethanol or Phenylethyl Alcohol or Phenethyl Alcohol
CAS Number: 60-12-8
Molecular Formula: C8H10O
Molecular Weight: 122.17
Phenyl Ethanol or Phenylethyl Alcohol or Phenethyl Alcohol
Phenylethyl Alcohol USP Grade Specifications
C8H10O --- 122.17
Benzeneethanol.
Phenethyl alcohol CAS 60-12-8
Identification: Infrared Absorption.
Specific gravity: between 1.017 and 1.020.
Refractive index: between 1.531 and 1.534 at 20.
Residue on ignition: Evaporate 10 mL in a suitable crucible, and ignite to constant weight: the limit is 0.005%.
Chlorinated compounds: Wind a 1.5- × 5-cm strip of 20-mesh copper gauze around the end of a copper wire. Heat the gauze in the non-luminous flame of a Bunsen burner until it glows without coloring the flame green. Permit the gauze to cool, and heat several times until a good coat of oxide has formed. Apply with a medicine dropper 2 drops of Phenylethyl Alcohol to the cooled gauze, ignite, and permit it to burn freely in the air. Again cool the gauze, add 2 more drops of Phenylethyl Alcohol, and burn as before. Continue this process until a total of 6 drops has been added and ignited, and then hold the gauze in the outer edge of the Bunsen flame, adjusted to a height of about 4 cm: no transient green color or other color is imparted to the flame.
Aldehyde: Shake 5 mL with 5 mL of 1 N sodium hydroxide, and allow to stand for 1 hour: no yellow color appears in the organic (top) layer.
Please visit SDS Safety Data Sheet of Phenyl Ethanol or Phenylethyl Alcohol or Phenethyl Alcohol Suppliers.
American Molecules, also known as ammol.org is a distributor, supplier and manufacturers' representative of all types of Pharmaceuticals, Functional Ingredients, Excipients and Specialty Chemicals in Texas USA. Our principals manufacture supply and export USP NF BP, Ph Eur, etc grades of chemicals pure and reagent grade, mineral fortifiers, FCC food grade. Tailor made particle size and customized specifications are offered. The principal's facility is having one or more of the certifications like FDA approval and GLP, cGMP, ISO9001, ISO14001, ISO/IEC 17025, ISO22000, FSSC 22000, ISO45001, FSSAI, Kosher, HALAL, COPP, WHO-GMP certified and Written Confirmation (WC) for export to Europe is available. The manufacturers suppliers and exporters observe WHO Good Manufacturing Practices and Good Laboratory Practices.
Suppliers and Manufacturers' Representative:
9910 Bent Oak Dr
Houston, TX 77040, USA
Call Toll Free: 1-855-55-AMMOL 1-855-552-6665
Email: info@ammol.org