Selenium Sulfide USP Grade Supplier Exporter Manufacturers' Representative
Call Toll Free +1-855-552-6665
Toll Free: 1-855-55-AMMOL
Quick Links to Products:
Aluminum Sulfate | Calcium Sulfate | Copper Sulfate | Iron Sulfide or Ferrous Sulfide Sticks Lumps Powder | Magnesium Sulfate | Potassium Saccharate | Pyruvic Acid | Resorcinol | Selenious Acid | Selenium Metal | Selenium Sulfide Suppliers | L-selenomethionine | Selenium Dioxide | Saccharin Insoluble | Saccharin Sodium | Sodium Selenite | Sodium Selenate | Sodium Sulfide Nonahydrate | Sodium Tartrate | Taurine | Vanadyl Sulfate | and more --
CAS Number: 7488-56-4
Molecular Formula: SeS2
Molecular Weight: 143.09
Selenium Sulfide USP Grade Specifications
SeS2 143.09 -- CAS 7488-56-4
Selenium Sulfide contains not less than 52.0 percent and not more than 55.5 percent of selenium (Se).
A: Filter 20 mL of the solution of Selenium Sulfide prepared as directed in the Assay, and to 10 mL of the filtrate add 5 mL of water and 5 g of urea. Heat to boiling, cool, and add 2 mL of potassium iodide solution (1 in 10): a yellowish orange to orange color is produced, and it darkens rapidly (presence of selenium).
B: Allow the solution obtained in Identification test A to stand for 10 minutes, filter, and to the filtrate add 10 mL of barium chloride: the solution becomes turbid (presence of sulfur).
Residue on ignition: not more than 0.2%.
Soluble selenium compounds:
Test solution: Mix 10.0 g of Selenium Sulfide with 100.0 mL of water in a 250-mL flask, allow to stand for 1 hour, with frequent agitation, and filter. To 10.0 mL of the filtrate add 2 mL of 2.5 M formic acid, dilute with water to 50 mL, mix, and adjust, if necessary, to a pH of 2.5 ± 0.5. Add 2 mL of freshly prepared 3,3-diaminobenzidine hydrochloride solution (1 in 200), mix, allow to stand for 45 minutes, and adjust with 6 N ammonium hydroxide to a pH of 6.5 ± 0.5. Transfer to a separator, add 10.0 mL of toluene, shake vigorously for 1 minute, allow the layers to separate, and discard the aqueous phase.
Standard solution: Using 10.0 mL of a solution of selenious acid containing 0.5 :g of selenium per mL, prepare a solution as directed under Test solution, beginning with “add 2 mL of 2.5 M formic acid.”
Procedure: Concomitantly determine the absorbances of the toluene layers of the Test solution and the Standard solution in 1-cm cells at 420 nm, with a suitable spectrophotometer, using a blank consisting of the same quantities of the same reagents treated in the same manner as the Test solution: the absorbance of the Test solution is not greater than that of the Standard solution (5 ppm).
Please visit SDS Safety Data Sheet of Selenium Sulfide Suppliers.
American Molecules, also known as ammol.org is a distributor, supplier and manufacturers' representative of all types of Pharmaceuticals, Functional Ingredients, Excipients and Specialty Chemicals in Texas USA. Our principals manufacture supply and export USP NF BP, Ph Eur, etc grades of chemicals pure and reagent grade, mineral fortifiers, FCC food grade. Tailor made particle size and customized specifications are offered. The principal's facility is having one or more of the certifications like FDA approval and GLP, cGMP, ISO9001, ISO14001, ISO/IEC 17025, ISO22000, FSSC 22000, ISO45001, FSSAI, Kosher, HALAL, COPP, WHO-GMP certified and Written Confirmation (WC) for export to Europe is available. The manufacturers suppliers and exporters observe WHO Good Manufacturing Practices and Good Laboratory Practices.
Suppliers and Manufacturers' Representative:
4220 Cartwright Rd, Suite 702, Missouri City, TX 77459, USA
Call Toll Free: 1-855-55-AMMOL 1-855-552-6665