 |
Magnesium Sulfate Heptahydrate Monohydrate Dried Anhydrous USP Analytical Reagent FCC Food Grade Supplier Exporter Manufacturers' Representative |
Email: info@ammol.org |
Call Toll Free +1-855-552-6665 |
Magnesium Sulfate Heptahydrate Monohydrate Dried Anhydrous
CAS Number:
Magnesium Sulfate Anhydrous Molecular Weight 120.37, CAS Number 7487-88-9
Magnesium Sulfate Monohydrate Molecular Weight 138.36, CAS Number 14567-64-7
Magnesium Sulfate Dried 15244-36-7
Magnesium Sulfate Heptahydrate Molecular Weight 246.48, CAS Number 10034-99-8
Molecular Formula:
Magnesium Sulfate Anhydrous MgSO4
Magnesium Sulfate Monohydrate MgSO4-H2O
Magnesium Sulfate Heptahydrate MgSO4-7H2O
Molecular Weight:
Magnesium Sulfate Anhydrous Molecular Weight 120.37
Magnesium Sulfate Monohydrate Molecular Weight 138.36
Magnesium Sulfate Heptahydrate Molecular Weight 246.48
Magnesium Sulfate
Heptahydrate and Magnesium Sulfate
Monohydrate Dried Anhydrous
We offer magnesium sulfate anhydrous with almost nil moisture and of reagent grade for desication and research use.
Magnesium Sulfate USP Grade Specifications
MgSO4-xH2O
Sulfuric acid magnesium salt (1:1), hydrate.
Magnesium sulfate (1:1) monohydrate 138.36
Magnesium sulfate (1:1) heptahydrate 246.48 CAS 10034-99-8
Anhydrous 120.37 CAS 7487-88-9
Magnesium Sulfate, rendered anhydrous by ignition, contains not less than 99.0 percent and not more than 100.5 percent of MgSO4.
Identification: A solution (1 in 20) resonds to the tests for Magnesium and for Sulfate.
pH: between 5.0 and 9.2, in a solution (1 in 20).
Loss on drying: Dry it at 105 for 2 hours: the anhydrous form loses not more than 2% of its weight.
Loss on ignition: Weigh accurately about 1 g in a crucible, heat at 105 for 2 hours, then ignite in a muffle furnace at 450 ± 25 to constant weight: the monohydrate loses between 13.0% and 16.0% of its weight, the dried form loses between 22.0% and 28.0% of its weight, and the heptahydrate loses between 40.0% and 52.0% of its weight.
Chloride: A 1.0-g portion shows no more chloride than corresponds to 0.20 mL of 0.020 N hydrochloric acid (0.014%).
Iron:
FOR MAGNESIUM SULFATE INTENDED FOR USE IN PREPARING NON-PARENTERAL DOSAGE FORMS:
Dissolve 0.50 g in 40 mL of water and proceed as directed in the test for Iron: the limit is 20 µg per g.
FOR MAGNESIUM SULFATE INTENDED FOR USE IN PREPARING PARENTERAL DOSAGE FORMS: the limit is 0.5 µg per g.
Heavy metals: Dissolve 2 g in 25 mL of water: the limit is 0.001%.
Selenium: The limit is 0.003%.
Magnesium Sulfate FCC Food Grade Specifications Magnesium Sulphate
Epsom Salt
MgSO4·xH2O Formula wt, monohydrate 138.38
Formula wt, heptahydrate 246.47
INS: 518
CAS: Magnesium Sulfate monohydrate 14168-73-1
CAS: Magnesium Sulfate heptahydrate 10034-99-8
CAS: Magnesium Sulfate dried 15244-36-7
DESCRIPTION
Magnesium Sulfate occurs as a colorless crystal or a granular crystalline powder. It is produced with one or seven molecules of water of hydration or in a dried form containing the equivalent of about 2.3 waters of hydration. It is readily soluble in water, slowly soluble in glycerin, and sparingly soluble in alcohol.
Function: Nutrient.
REQUIREMENTS
Identification: A 1:20 aqueous solution gives positive tests for Magnesium and for Sulfate.
Assay: Not less than 99.5% of MgSO4 after ignition.
Lead: Not more than 4 mg/kg.
Loss on Ignition Monohydrate: Between 13.0% and 16.0%; Heptahydrate: Between 40.0% and 52.0%; Dried: Between 22.0% and 28.0%.
Selenium: Not more than 0.003%.
Magnesium Sulfate Analytical Reagent Grade Specifications Magnesium Sulphate
Magnesium Sulfate Heptahydrate
MgSO4-7H2O
Formula Weight 246.48
CAS Number 10034-99-8
REQUIREMENTS
Assay: 98.0-102.0% MgSO4-7H2O
pH of a 5% solution: 5.0-8.2 at 25C
MAXIMUM ALLOWABLE
Insoluble matter: 0.005%
Chloride (Cl):. 5 ppm
Nitrate (NO3):. 0.002%
Ammonium (NH4): 0.002%
Calcium (Ca): 0.02%
Manganese (Mn): 5 ppm
Potassium (K): 0.005%
Sodium (Na): 0.005%
Strontium (Sr): 0.005%
Heavy metals (as Pb): 5 ppm
Iron (Fe): 5 ppm.
We also supply Magnesium Sulfate Heptahydrate and Magnesium Sulfate Monohydrate Dried Anhydrous of BP Ph Eur Grade.
Please visit SDS Safety Data Sheet of Magnesium Sulfate Suppliers.
American Molecules, also known as ammol.org is a distributor, supplier and manufacturers' representative of all types of Pharmaceuticals, Functional Ingredients, Excipients and Specialty Chemicals in Texas USA. Our principals manufacture supply and export USP NF BP, Ph Eur, etc grades of chemicals pure and reagent grade, mineral fortifiers, FCC food grade. Tailor made particle size and customized specifications are offered. The principal's facility is having one or more of the certifications like FDA approval and GLP, cGMP, ISO9001, ISO14001, ISO/IEC 17025, ISO22000, FSSC 22000, ISO45001, FSSAI, Kosher, HALAL, COPP, WHO-GMP certified and Written Confirmation (WC) for export to Europe is available. The manufacturers suppliers and exporters observe WHO Good Manufacturing Practices and Good Laboratory Practices.
Suppliers and Manufacturers' Representative:
9910 Bent Oak Dr
Houston, TX 77040, USA
Call Toll Free: 1-855-55-AMMOL 1-855-552-6665
Email: info@ammol.org