 |
Sodium Hyaluronate or Hyaluronic Acid Sodium Salt BP Ph Eur USP NF Grade Supplier Exporter Manufacturers' Representative |
Email: info@ammol.org |
Call Toll Free +1-855-552-6665 |
Sodium Hyaluronate or Hyaluronic Acid Sodium Salt
CAS Number: 9067-32-7
Molecular Formula: (C14H20NNaO11)n
Sodium Hyaluronate or Hyaluronic Acid Sodium Salt
Sodium Hyaluronate BP Ph Eur Grade Specifications
Ph Eur monograph
(C14H20NNaO11)n --- CAS 9067-32-7
Action and use: High viscosity mucopolysaccharide.
DEFINITION
Sodium salt of hyaluronic acid, a glycosaminoglycan consisting of D-glucuronic acid and Nacetyl- D-glucosamine disaccharide units.
Content: 95.0 per cent to 105.0 per cent (dried substance).
Intrinsic viscosity: 90 per cent to 120 per cent of the value stated on the label.
PRODUCTION
It is extracted from cocks' combs or obtained by fermentation from Streptococci, Lancefield Groups A and C. When produced by fermentation of gram-positive bacteria, the process must be shown to reduce or eliminate pyrogenic or inflammatory components of the cell wall.
CHARACTERS
Appearance: White or almost white, very hygroscopic powder or fibrous aggregate.
Solubility: Sparingly soluble or soluble in water, practically insoluble in acetone and in anhydrous ethanol.
IDENTIFICATION
A. Infrared absorption spectrophotometry. ComparisoniPh. Eur. reference spectrum of sodium hyaluronate.
B. It gives reaction of sodium.
TESTS
Solution S: Weigh a quantity of the substance to be examined equivalent to 0.10 g of the dried substance and add 30.0 ml of a 9 g/l solution of sodium chloride. Mix gently on a shaker until dissolved (about 12 h).
Appearance of solution: Solution S is clear and its absorbance at 600 nm is not greater than 0.01.
pH: 5.0 to 8.5.
Dissolve the substance to be examined in carbon dioxide-free water to obtain a solution containing a quantity equivalent to 5 mg of the dried substance per millilitre.
Intrinsic viscosity: To pass the test.
Sulphated glycosaminoglycans: Maximum 1 per cent, if the product is extracted from cocks' combs.
Nucleic acids: The absorbance of solution S at 260 nm is maximum 0.5.
Protein: Maximum 0.3 per cent; maximum 0.1 per cent, if intended for use in the manufacture of parenteral preparations.
Chlorides: Maximum 0.5 per cent.
Iron: Maximum 80.0 ppm.
Heavy metals: Maximum 20 ppm; maximum 10 ppm if intended for use in the manufacture of parenteral preparations.
Loss on drying: Maximum 20.0 per cent, determined on 0.500 g by drying at 100-110C over diphosphorus pentoxide for 6 h.
Microbial contamination: Total viable aerobic count not more than 100 micro-organisms per gram. Use 1 g of the substance to be examined.
Bacterial endotoxins: Less than 0.5 IU/mg, if intended for use in the manufacture of parenteral preparations without a further appropriate procedure for the removal of bacterial endotoxins; less than 0.05 IU/mg, if intended for use in the manufacture of intra-ocular preparations or intra-articular preparations without a further appropriate procedure for the removal of bacterial endotoxins.
Please visit SDS Safety Data Sheet of Sodium Hyaluronate or Hyaluronic Acid Sodium Salt Suppliers.
American Molecules, also known as ammol.org is a distributor, supplier and manufacturers' representative of all types of Pharmaceuticals, Functional Ingredients, Excipients and Specialty Chemicals in Texas USA. Our principals manufacture supply and export USP NF BP, Ph Eur, etc grades of chemicals pure and reagent grade, mineral fortifiers, FCC food grade. Tailor made particle size and customized specifications are offered. The principal's facility is having one or more of the certifications like FDA approval and GLP, cGMP, ISO9001, ISO14001, ISO/IEC 17025, ISO22000, FSSC 22000, ISO45001, FSSAI, Kosher, HALAL, COPP, WHO-GMP certified and Written Confirmation (WC) for export to Europe is available. The manufacturers suppliers and exporters observe WHO Good Manufacturing Practices and Good Laboratory Practices.
Suppliers and Manufacturers' Representative:
9910 Bent Oak Dr
Houston, TX 77040, USA
Call Toll Free: 1-855-55-AMMOL 1-855-552-6665
Email: info@ammol.org