 |
Magnesium Glycerophosphate BP Ph Eur Grade Supplier Exporter Manufacturers' Representative |
Email: info@ammol.org |
Call Toll Free +1-855-552-6665 |
Magnesium Glycerophosphate
CAS Number: 927-20-8
Molecular Formula: C3H7MgO6P
Molecular Weight: 194.4
Magnesium Glycerophosphate
Magnesium Glycerophosphate was not found in USP Monograph.
Magnesium Glycerophosphate BP Ph Eur Grade Specifications
Ph Eur
C3H7MgO6P -- 194.4 -- CAS 927-20-8
DEFINITION
Mixture, in variable proportions, of magnesium salts of (RS)-2,3-dihydroxypropyl phosphate and 2-hydroxy-1-(hydroxymethyl)ethyl phosphate, which may be hydrated.
Content: 11.0 per cent to 12.5 per cent of Mg (dried substance).
CHARACTERS
Appearance: White or almost white powder, hygroscopic.
Solubility: Practically insoluble in ethanol (96 per cent). It dissolves in dilute solutions of acids.
IDENTIFICATION
A. Mix 1 g with 1 g of potassium hydrogen sulphate in a test tube fitted with a glass tube. Heat strongly and direct the white vapour towards a piece of filter paper impregnated with a freshly prepared 10 g/l solution of sodium nitroprusside. The filter paper develops a blue colour in contact with piperidine.
B. Ignite 0.1 g in a crucible. Take up the residue with 5 ml of nitric acid and heat on a water-bath for 1 min. Filter. The filtrate gives reaction (b) of phosphates.
C. It gives the reaction of magnesium.
TESTS
Solution S: Dissolve 2.5 g in carbon dioxide-free water prepared from distilled water and dilute to 50 ml with the same solvent.
Appearance of solution: Solution S is not more opalescent than reference suspension.
Acidity: Dissolve 1.0 g in 100 ml of carbon dioxide-free water. Add 0.1 ml of phph solution. Not more than 1.5 ml of 0.1 M sodium hydroxide is required to change the colour of the indicator.
Glycerol and ethanol (96 per cent)-soluble substances: Maximum 1.5 per cent.
Shake 1.0 g with 25 ml of ethanol (96 per cent) for 2 min. Filter and wash the residue with 5 ml of ethanol (96 per cent). Combine the filtrate and the washings, evaporate to dryness on a water-bath and dry the residue at 70C for 1 h. The residue weighs a maximum of 15 mg.
Chlorides: Maximum 0.15 per cent.
Phosphates: Maximum 0.5 per cent.
Sulphates: Maximum 0.1 per cent.
Iron: Maximum 150 ppm.
Heavy metals: Maximum 20 ppm.
Loss on drying: Maximum 12.0 per cent, determined on 1.000 g by drying in an oven at 150C for 4 h.
Please visit SDS Safety Data Sheet of Magnesium Glycerophosphate Suppliers.
American Molecules, also known as ammol.org is a distributor, supplier and manufacturers' representative of all types of Pharmaceuticals, Functional Ingredients, Excipients and Specialty Chemicals in Texas USA. Our principals manufacture supply and export USP NF BP, Ph Eur, etc grades of chemicals pure and reagent grade, mineral fortifiers, FCC food grade. Tailor made particle size and customized specifications are offered. The principal's facility is having one or more of the certifications like FDA approval and GLP, cGMP, ISO9001, ISO14001, ISO/IEC 17025, ISO22000, FSSC 22000, ISO45001, FSSAI, Kosher, HALAL, COPP, WHO-GMP certified and Written Confirmation (WC) for export to Europe is available. The manufacturers suppliers and exporters observe WHO Good Manufacturing Practices and Good Laboratory Practices.
Suppliers and Manufacturers' Representative:
9910 Bent Oak Dr
Houston, TX 77040, USA
Call Toll Free: 1-855-55-AMMOL 1-855-552-6665
Email: info@ammol.org