 |
Potassium Permanganate USP BP Ph Eur EP JP Analytical Reagent Grade Supplier Exporter Manufacturers' Representative |
Email: info@ammol.org |
Call Toll Free +1-855-552-6665 |
Potassium Permanganate
CAS Number: 7722-64-7
Molecular Formula: KMnO4
Molecular Weight: 158.03
Potassium Permanganate
Potassium Permanganate USP Grade Specifications
KMnO4 158.03 --- CAS 7722-64-7.
Permanganic acid (HMnO4), potassium salt.
KMnO4 contains not less than 99.0 percent and not more than 100.5 percent of KMnO4, calculated on the dried basis.
Caution: Observe great care in handling Potassium Permanganate, as dangerous explosions may occur if it is brought into contact with organic or other readily oxidizable substances, either in solution or in the dry state.
Identification: A solution of it is deep violet-red when concentrated and pink when highly diluted, and responds to the tests for Permanganate.
Loss on drying: Dry it over silica gel for 18 hours: it loses not more than 0.5% of its weight.
Insoluble substances: Dissolve 2.0 g in 150 mL of water that previously has been warmed to steam-bath temperature, and filter immediately through a tarred, medium-porosity filtering crucible. Wash the filter with three 50-mL portions of the warm water, and dry the filtering crucible and the residue at 105 for 3 hours: not more than 4 mg of residue is obtained (0.2%).
Potassium Permanganate Analytical Reagent Grade Specifications
KMnO4 --- 158.03 --- CAS 7722-64-7
REQUIREMENTS
Assay: 99.0% KMnO4 min
MAXIMUM ALLOWABLE
Insoluble matter: 0.2%
Chloride and chlorate (as Cl): 0.005%
Nitrogen compounds (as N): 0.005%
Sulfate (SO4): 0.02%.
We also manufacture Potassium Permanganate BP Ph Eur EP JP Grade.
Please visit SDS Safety Data Sheet of Potassium Permanganate Suppliers.
American Molecules, also known as ammol.org is a distributor, supplier and manufacturers' representative of all types of Pharmaceuticals, Functional Ingredients, Excipients and Specialty Chemicals in Texas USA. Our principals manufacture supply and export USP NF BP, Ph Eur, etc grades of chemicals pure and reagent grade, mineral fortifiers, FCC food grade. Tailor made particle size and customized specifications are offered. The principal's facility is having one or more of the certifications like FDA approval and GLP, cGMP, ISO9001, ISO14001, ISO/IEC 17025, ISO22000, FSSC 22000, ISO45001, FSSAI, Kosher, HALAL, COPP, WHO-GMP certified and Written Confirmation (WC) for export to Europe is available. The manufacturers suppliers and exporters observe WHO Good Manufacturing Practices and Good Laboratory Practices.
Suppliers and Manufacturers' Representative:
9910 Bent Oak Dr
Houston, TX 77040, USA
Call Toll Free: 1-855-55-AMMOL 1-855-552-6665
Email: info@ammol.org