 |
Sodium Chlorite Powder & Solution Supplier Exporter Manufacturers' Representative |
Email: info@ammol.org |
Call Toll Free +1-855-552-6665 |
Sodium Chlorite Powder & Solution
CAS Number: 7758-19-2
Molecular Formula: NaClO2
Molecular Weight: 90.45
Sodium Chlorite Powder & Sodium Chlorite Solution
General Properties and Specifications of Sodium Chlorite 80% Powder:
Appearance: White to off-white powder, crystals, or flakes.
Odor: Faint bleach like odor.
Assay: 80% minimum as NaClO2
Total Alkalinity: 10% as NaOH maximum.
General Properties and Specifications of Sodium Chlorite 31% Solution:
Appearance: Clear or light yellowish liquid.
Odor: Faint bleach like odor.
Sodium Chlorite: 31% (1% deviation on either side) as NaClO2 (other dilutions can be offered).
Total Alkalinity: 2.5% as NaOH maximum.
Water: 55% to 62 5%
pH: 12 to 13.5
Specific Gravity: 1.27 to 1.32
Sodium Chlorite Solution is often supplied as 15% active or as required by the buyer.
Acidified Sodium Chlorite Solutions FCC Food Grade:
DESCRIPTION
Acidified Sodium Chlorite (ASC) Solutions occur as clear, colorless to pale-yellow liquids. The ASC Solutions are equilibrium mixtures of sodium chlorite (NaClO2) and chlorous acid (HClO2). ASC Solutions are produced by lowering the pH of a sodium chlorite solution with a safe and suitable acid to achieve a pH within the range 2.3 to 3.9 depending on the intended use.
Function: Antimicrobial agent in processing water used to spray, dip, rinse, or store food before processing, to be followed by rinsing in potable water or by blanching, cooking, or canning; sanitizer for hard surfaces; broad-spectrum bactericide, virucide, fungicide, and sporicide.
REQUIREMENTS
Lead: Not more than 1 mg/kg.
Mercury: Not more than 1 mg/kg.
pH: Between 2.3 and 3.9.
Note: The pH is chosen depending on the application; it controls the concentration of metastable chlorous acid, which rapidly breaks down into chlorine dioxide, chloride, and in some applications, chlorate.
Caution: To minimize the evolution of hazardous chlorine dioxide gas, do not adjust the pH below 2.3.
Sodium Chlorite: Between 40 and 1200 ppm, depending on the application.
Please visit SDS Safety Data Sheet of Sodium Chlorite Powder & Solution Suppliers.
American Molecules, also known as ammol.org is a distributor, supplier and manufacturers' representative of all types of Pharmaceuticals, Functional Ingredients, Excipients and Specialty Chemicals in Texas USA. Our principals manufacture supply and export USP NF BP, Ph Eur, etc grades of chemicals pure and reagent grade, mineral fortifiers, FCC food grade. Tailor made particle size and customized specifications are offered. The principal's facility is having one or more of the certifications like FDA approval and GLP, cGMP, ISO9001, ISO14001, ISO/IEC 17025, ISO22000, FSSC 22000, ISO45001, FSSAI, Kosher, HALAL, COPP, WHO-GMP certified and Written Confirmation (WC) for export to Europe is available. The manufacturers suppliers and exporters observe WHO Good Manufacturing Practices and Good Laboratory Practices.
Suppliers and Manufacturers' Representative:
9910 Bent Oak Dr
Houston, TX 77040, USA
Call Toll Free: 1-855-55-AMMOL 1-855-552-6665
Email: info@ammol.org