 |
Ammonium Bromide BP Ph Eur Analytical Reagent Grade Supplier Exporter Manufacturers' Representative |
Email: info@ammol.org |
Call Toll Free +1-855-552-6665 |
Ammonium Bromide
CAS Number: 12124-97-9
Molecular Formula: NH4Br
Molecular Weight: 97.94
Ammonium Bromide
Ammonium Bromide is not found in USP monograph.
Ammonium Bromide BP Ph Eur Grade Specifications
NH4Br - 97.9 - CAS 12124-97-9
Ammonium Bromide
DEFINITION
Content: Ammonium Bromide 98.5 per cent to 100.5 per cent (dried substance).
CHARACTERS
Appearance: Ammonium Bromide is white or almost white, crystalline powder or colourless crystals, hygroscopic.
Solubility: Freely soluble in water, sparingly soluble in alcohol. It becomes yellow when exposed to light or air.
IDENTIFICATION
A. It gives reaction of bromides.
B. 10 ml of solution S (see Tests) gives the reaction of ammonium salts.
TESTS
Solution S: Dissolve 10.0 g in carbon dioxide-free water prepared from distilled water and dilute to 100 ml with the same solvent.
Appearance of solution: Solution S is clear and colourless.
Acidity or alkalinity: To 10 ml of solution S add 0.05 ml of methyl red solution. Not more than 0.5 ml of 0.01 M hydrochloric acid or 0.01 M sodium hydroxide is required to change the colour of the indicator.
Bromates: To 10 ml of solution S add 1 ml of starch solution, 0.1 ml of a 100 g/l solution of potassium iodide and 0.25 ml of 0.5 M sulphuric acid and allow to stand protected from light for 5 min. No blue or violet colour develops.
Chlorides: Maximum 0.6 per cent.
Iodides: To 5 ml of solution S add 0.15 ml of ferric chloride solution and 2 ml of methylene chloride. Shake and allow to separate. The lower layer is colourless.
Sulphates: Maximum 100 ppm.
Iron: Maximum 20 ppm.
Magnesium and alkaline-earth metals: Maximum 200 ppm, calculated as Ca
Heavy metals: Maximum 10 ppm.
Loss on drying: Maximum 1.0 per cent, determined on 1.000 g by drying in an oven at 100-105C
Sulphated ash: Maximum 0.1 per cent, determined on 1.0 g.
Ammonium Bromide Analytical Reagent Grade Specifications
NH4Br
Ammonium Bromide
Formula Weight: 97.94
CAS Number: 12124-97-9
REQUIREMENTS
Assay: 99.0% NH4Br
pH of a 5% solution: 4.5-6.0 at 25C
MAXIMUM ALLOWABLE
Residue after ignition: 0.01%
Bromate (BrO3): 0.002%
Chloride (Cl): 0.2%
Iodide (I): Passes test
Sulfate (SO4): 0.005%
Barium (Ba): 0.002%
Heavy metals (as Pb): 5 ppm
Iron (Fe): 5 ppm
Please visit SDS Safety Data Sheet of Ammonium Bromide Suppliers.
American Molecules, also known as ammol.org is a distributor, supplier and manufacturers' representative of all types of Pharmaceuticals, Functional Ingredients, Excipients and Specialty Chemicals in Texas USA. Our principals manufacture supply and export USP NF BP, Ph Eur, etc grades of chemicals pure and reagent grade, mineral fortifiers, FCC food grade. Tailor made particle size and customized specifications are offered. The principal's facility is having one or more of the certifications like FDA approval and GLP, cGMP, ISO9001, ISO14001, ISO/IEC 17025, ISO22000, FSSC 22000, ISO45001, FSSAI, Kosher, HALAL, COPP, WHO-GMP certified and Written Confirmation (WC) for export to Europe is available. The manufacturers suppliers and exporters observe WHO Good Manufacturing Practices and Good Laboratory Practices.
Suppliers and Manufacturers' Representative:
9910 Bent Oak Dr
Houston, TX 77040, USA
Call Toll Free: 1-855-55-AMMOL 1-855-552-6665
Email: info@ammol.org