 |
Copper I Oxide or Cuprous Oxide SDS Safety Data Sheet of Supplier Exporter Manufacturers' Representative |
Email: info@ammol.org |
Call Toll Free +1-855-552-6665 |
Toll Free: 1-855-55-AMMOL |
|
DASC or Dihydroxyaluminum Sodium Carbonate USP Grade Supplier Exporter Manufacturers' Representative |
|
Quick Links to Products: Acetic Acid Glacial | Aluminum Chloride | Aluminum Chlorohydrate | Aluminum Hydroxide Gel & Dried Aluminum Hydroxide | Aluminum Monostearate and Aluminum Distearate | Aluminum Sulfate | Ammonium Bicarbonate | Ammonium Carbamate | Ammonium Carbonate | Bismuth Subcarbonate | Calcium Carbonate | Calcium Hydroxide | Copper Carbonate & Basic Copper Carbonate | Dihydroxyaluminum Aminoacetate | Dihydroxyaluminum Sodium Carbonate | Dried Aluminum Phosphate | Magnesium Aluminum Silicate | Monosodium Glutamate | Potassium Bicarbonate | Potassium Carbonate | Propylene Carbonate | Sodium Carbonate | Basic Zinc Carbonate | and more -- |
|
DASC or Dihydroxyaluminum Sodium Carbonate
CAS Number: 539-68-4 and 16482-55-6
Molecular Formula: NaAl(OH)2CO3
Molecular Weight: 143.99
DASC or Dihydroxyaluminum Sodium Carbonate
Dihydroxyaluminum Sodium Carbonate USP Grade Specifications
NaAl(OH)2CO3 -- 143.99
Aluminum, [carbonato(1-)-O]dihydroxy-, monosodium salt.
Sodium (T-4)-[carbonato(2-)-O,O′]dihydroxyaluminate(1-).
Sodium (carbonato)dihydroxyaluminate(1-) CAS 539-68-4 & CAS 16482-55-6
Dihydroxyaluminum Sodium Carbonate contains not less than 98.3 percent and not more than 107.9 percent of dihydroxyaluminum sodium carbonate (CH2AlNaO5), calculated on the dried basis.
Identification: A 1-g portion, treated with 20 mL of 3 N hydrochloric acid, dissolves with effervescence, and the resulting solution responds to the tests for Aluminum and to the flame test for Sodium.
pH: between 9.9 and 10.2 in a suspension (1 in 25).
Acid-neutralizing capacity: not less than 75.0% of the expected mEq value, determined on about 425 mg of the undried material, accurately weighed, and calculated in relation to the results of the Assay. Each mg of NaAl(OH)2CO3 has an expected acid-neutralizing capacity of 0.0278 mEq.
Loss on drying: Dry it at 130 to constant weight: it loses not more than 14.5% of its weight.
Isopropyl alcohol: To pass the test: The limit is 1.0%.
Sodium content: To pass the test: between 15.2% and 16.8% is found.
Mercury: the limit is 1 ppm.
Assay: Not less than 98.3 percent and not more than 107.9 percent of dihydroxyaluminum sodium carbonate (CH2AlNaO5), calculated on the dried basis.
Please visit SDS Safety Data Sheet of DASC or Dihydroxyaluminum Sodium Carbonate Suppliers.
American Molecules, also known as ammol.org is a distributor, supplier and manufacturers' representative of all types of Pharmaceuticals, Functional Ingredients, Excipients and Specialty Chemicals in Texas USA. Our principals manufacture supply and export USP NF BP, Ph Eur, etc grades of chemicals pure and reagent grade, mineral fortifiers, FCC food grade. Tailor made particle size and customized specifications are offered. The principal's facility is having one or more of the certifications like FDA approval and GLP, cGMP, ISO9001, ISO14001, ISO/IEC 17025, ISO22000, FSSC 22000, ISO45001, FSSAI, Kosher, HALAL, COPP, WHO-GMP certified and Written Confirmation (WC) for export to Europe is available. The manufacturers suppliers and exporters observe WHO Good Manufacturing Practices and Good Laboratory Practices.
Suppliers and Manufacturers' Representative:
9910 Bent Oak Dr
Houston, TX 77040, USA
Call Toll Free: 1-855-55-AMMOL 1-855-552-6665
Email: info@ammol.org